6KU TRACK 단계별 구축 매뉴얼 - 페이지 3
{카테고리_이름} 6KU TRACK에 대한 단계별 구축 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 6KU TRACK 17 페이지.
페이지 인쇄
- 1. Table of Contents
- 2. Tools
- 3. Let's Get Started
- 4. Installing the Handlebar
- 5. Installing the Front Wheel
- 6. Aligning the Stem
- 7. Installing the Seatpost
- 8. Optimizing the Brake Pads
- 9. Preparing Pedals for Installation
- 10. Installing the Pedals
- 11. Pumping the Tires
- 12. Let's Finish up that Handlebar
- 13. Optional Fixed Gear/Freewheel
- 14. Contact Information
LET'S GET STARTED
a.
Cut and remove the white straps
around the box.
b.
Pop open the top lid of the box (if
your box has staples, be mindful of
them).
c.
Carefully pull your bicycle out of the
box.
d.
Grab your clippers and get ready to
remove some zip ties
(be mindful to
not scratch your bike).
e.
First, cut all zip ties off from the front
wheel and carefully slide the front
wheel off of the crank arm.
f.
Remove all cardboard and plastic
covers from the front wheel.
g.
Next, cut all zip ties off of the
accessory box and stem on the front of
the fork.
h.
Finally, cut all zip ties off of the
handlebars and turn the fork around so
it's facing forward.
i.
Remove packaging material from the
stem and handlebar.
2