6KU TRACK 단계별 구축 매뉴얼 - 페이지 6
{카테고리_이름} 6KU TRACK에 대한 단계별 구축 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 6KU TRACK 17 페이지.
페이지 인쇄
- 1. Table of Contents
- 2. Tools
- 3. Let's Get Started
- 4. Installing the Handlebar
- 5. Installing the Front Wheel
- 6. Aligning the Stem
- 7. Installing the Seatpost
- 8. Optimizing the Brake Pads
- 9. Preparing Pedals for Installation
- 10. Installing the Pedals
- 11. Pumping the Tires
- 12. Let's Finish up that Handlebar
- 13. Optional Fixed Gear/Freewheel
- 14. Contact Information
ALIGNING THE STEM
a.
While standing over your bike, take
your 5mm Allen Key and loosen both
pinch bolts on the backside of the
stem.
b.
Next, align the stem to the center of
the front wheel, making sure the stem
and front wheel are both parallel when
viewed from atop.
c.
Finally, tighten the stem's pinch
bolts.
d.
Untie/cut the string holding the
crank to the rear wheel.
5