7inova 7R152 Handbuch zur Schnellinstallation

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Netzwerk-Router 7inova 7R152 herunter. 7inova 7R152 2 Seiten. Wireless-11n wallmounted wifi router 300m

Seite drucken

Quick Installation Guide

Wireless-11N WallMounted Wifi Router 300M

Model：7R152

3 Configuration Mode

3.1 Configure Bridge Mode

3.1.1 After logging in and click "Operating Mode", you will see 3 modes:

Select "Bridge" then click on "Save"

300Mbps Wireless Router

FW RVE: 7R152_V1.0

3.2 Configure Router Mode

3.2.1 Follow process 2.3 to 2.4.

3.2.2 Select "Router" then click on "Save".

300Mbps Wireless Router

FW RVE: 7R152_V1.0

Wireless-N Router

Before you start to use this device, please check if there's anything

missing in the package, and contact your dealer of purchase to

claim for missing items:

Package Contents:

1x 7R152 Wifi Repeater

1x 1m Ethernet cable with RJ45 connector

1x Quick Installation Guide

Appearance Introduction

LED indicators' Status Description:

Euro plug

Power LED

WLAN LED

WPS LED

Ethernet

Reset Button

Ethernet LED

WPS Button

Reset: If need to reset the router, press and hold RESET button for 3-5

seconds, release until all other LED are off except Power LED.

Wireless-N Router

3.2.3 Wait a few seconds, then refresh the Browser. Select "Setup Wizard",

then click on "Next" to continue.

300Mbps Wireless Router

FW RVE: 7R152_V1.0

3.2.4 You will see "WAN Connection Type": Static IP / DHCP / PPPoE /

L2TP / PPTP.

Static IP: Select "Static IP" and input the network's IP address information,

then click "Next"

300Mbps Wireless Router

FW RVE: 7R152_V1.0

Wireless-N Router

Indicator

Name

Status

Description

Power Status Indicator

Green On

Get Powered

Green slow blink

Wireless Function Launched

Wireless Status Indicator

Green fast blink

Data Transmission via wireless

Green fast blink

WPS Function Launched

WPS Status Indicator

Not use or have

Not bright

completed the connection

Green On

Ethernet Connected

Ethernet Status Indicator

Green fast blink

Data Transmission via Ethernet

Cautions:

1. Disconnect the device in thunderstorms in case of lightning damage.

2. Keep far from heat source and ensure ventilation.

3. Keep waterproof in the storage, transportation and operating environment.

1 Computer Configuration

1.1 Click "Start→Control Panel→Network and Internet→Network and Sharing

Center→Change adapter settings→Wi-Fi(right click)→Properties"

1.2 Double click "Internet Protocol Version 4(TCP/IPv4)"

1.3 To set up the computer IP 192.168.2.x (x arbitrary integer between

2~252), subnet mask of 255.255.255.0, Click "OK". Back to the last

interface and click "OK"

Wireless-N Router

3.2.5 Setup your info and click on "Next"

300Mbps Wireless Router

FW RVE: 7R152_V1.0

3.2.6 Click "Finish" wait for a few, then accord to "4 Reconnect to Router"

to reconnect the router.

300Mbps Wireless Router

FW RVE: 7R152_V1.0

Wireless-N Router

2 Connect To Wireless Network

2.1 Pulg the Wi-Fi Router to a wall socket.

2.2 Click on the network icon(

) on the right

bottom of your desktop. You will find the signal

from the Wi-Fi Router. Click on "Connect" and

wait for a few seconds.

2.3 Open web browser and type http://192.168.2.1 in the browser's address

box. This number is the default IP address for this devices.

Note: Please check whether the WiFi-Router accord with factory default settings

once you can't download http://192.168.2.1. If you are still not sure what reasons,

you can reset the WiFi-Router, just need to press the reset button for 3-5 seconds,

then try again.

2.4 The login screen below will appear.

Enter the "Username" and "Password"

then click "Login" to login. The default

Username is "admin" and Password is

"admin".

Wireless-N Router

3.2.7 Select "DHCP" and click "Next", then follow process 3.2.5 to 3.2.6

300Mbps Wireless Router

FW RVE: 7R152_V1.0

3.2.8 Select "PPPoE" and fill your Username and Password provided by

network operator.

Follow process 3.2.5 to 3.2.6 after click "Next".

300Mbps Wireless Router

FW RVE: 7R152_V1.0

Wireless-N Router