7inova 7R152 Manual de instalação rápida
Procurar online ou descarregar pdf Manual de instalação rápida para Router de rede 7inova 7R152. 7inova 7R152 2 páginas. Wireless-11n wallmounted wifi router 300m
Quick Installation Guide
Wireless-11N WallMounted Wifi Router 300M
Model:7R152
3 Configuration Mode
3.1 Configure Bridge Mode
3.1.1 After logging in and click "Operating Mode", you will see 3 modes:
Select "Bridge" then click on "Save"
300Mbps Wireless Router
FW RVE: 7R152_V1.0
3.2 Configure Router Mode
3.2.1 Follow process 2.3 to 2.4.
3.2.2 Select "Router" then click on "Save".
300Mbps Wireless Router
FW RVE: 7R152_V1.0
04
Wireless-N Router
Before you start to use this device, please check if there's anything
missing in the package, and contact your dealer of purchase to
claim for missing items:
Package Contents:
1x 7R152 Wifi Repeater
1x 1m Ethernet cable with RJ45 connector
1x Quick Installation Guide
Appearance Introduction
LED indicators' Status Description:
Euro plug
Power LED
WLAN LED
WPS LED
Ethernet
Reset Button
Ethernet LED
WPS Button
Reset: If need to reset the router, press and hold RESET button for 3-5
seconds, release until all other LED are off except Power LED.
01
Wireless-N Router
3.2.3 Wait a few seconds, then refresh the Browser. Select "Setup Wizard",
then click on "Next" to continue.
300Mbps Wireless Router
FW RVE: 7R152_V1.0
3.2.4 You will see "WAN Connection Type": Static IP / DHCP / PPPoE /
L2TP / PPTP.
Static IP: Select "Static IP" and input the network's IP address information,
then click "Next"
300Mbps Wireless Router
FW RVE: 7R152_V1.0
05
Wireless-N Router
Indicator
Name
Status
Description
Power Status Indicator
Green On
Get Powered
Green slow blink
Wireless Function Launched
Wireless Status Indicator
Green fast blink
Data Transmission via wireless
Green fast blink
WPS Function Launched
WPS Status Indicator
Not use or have
Not bright
completed the connection
Green On
Ethernet Connected
Ethernet Status Indicator
Green fast blink
Data Transmission via Ethernet
Cautions:
1. Disconnect the device in thunderstorms in case of lightning damage.
2. Keep far from heat source and ensure ventilation.
3. Keep waterproof in the storage, transportation and operating environment.
1 Computer Configuration
1.1 Click "Start→Control Panel→Network and Internet→Network and Sharing
Center→Change adapter settings→Wi-Fi(right click)→Properties"
1.2 Double click "Internet Protocol Version 4(TCP/IPv4)"
1.3 To set up the computer IP 192.168.2.x (x arbitrary integer between
2~252), subnet mask of 255.255.255.0, Click "OK". Back to the last
interface and click "OK"
02
Wireless-N Router
3.2.5 Setup your info and click on "Next"
300Mbps Wireless Router
FW RVE: 7R152_V1.0
3.2.6 Click "Finish" wait for a few, then accord to "4 Reconnect to Router"
to reconnect the router.
300Mbps Wireless Router
FW RVE: 7R152_V1.0
06
Wireless-N Router
2 Connect To Wireless Network
2.1 Pulg the Wi-Fi Router to a wall socket.
2.2 Click on the network icon(
) on the right
bottom of your desktop. You will find the signal
from the Wi-Fi Router. Click on "Connect" and
wait for a few seconds.
2.3 Open web browser and type http://192.168.2.1 in the browser's address
box. This number is the default IP address for this devices.
Note: Please check whether the WiFi-Router accord with factory default settings
once you can't download http://192.168.2.1. If you are still not sure what reasons,
you can reset the WiFi-Router, just need to press the reset button for 3-5 seconds,
then try again.
2.4 The login screen below will appear.
Enter the "Username" and "Password"
then click "Login" to login. The default
Username is "admin" and Password is
"admin".
03
Wireless-N Router
3.2.7 Select "DHCP" and click "Next", then follow process 3.2.5 to 3.2.6
300Mbps Wireless Router
FW RVE: 7R152_V1.0
3.2.8 Select "PPPoE" and fill your Username and Password provided by
network operator.
Follow process 3.2.5 to 3.2.6 after click "Next".
300Mbps Wireless Router
FW RVE: 7R152_V1.0
07
Wireless-N Router