AFFORDABLE LIFTS KCSPM3648 Montage- und Installationshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Montage- und Installationshandbuch für Hebesysteme AFFORDABLE LIFTS KCSPM3648 herunter. AFFORDABLE LIFTS KCSPM3648 15 Seiten. Affordable lift

Seite drucken

3500009

MW82.5x 0.625xX Wheel Kit - Bolts

6000111

A16B33C2.75

5. Prepare to Assemble and Install Your Lift

5.1. We Are Here To Help: We would much rather have you call us for help than have you install your lift incorrectly. Your

lift's serial number is E9997. If you have questions or problems during assembly please call Customer Support at (USA)

434-515-2321 (Provide your Serial Number 'E9997' and contact information when you call).

5.2. Receiving Your Lift: If damage has occurred during shipping immediately document it with photographs and notify our

Shipping Department at (USA) 434-207-8444 (Provide your Serial Number 'E9997' and contact information when you call).

Check your lift for damage before signing the papers with the delivery man, when applicable. If there is damage, note it on

the delivery paperwork appropriately and notify Affordable Lifts. If damage is found after the delivery papers are signed,

we will not be able to file a claim for the damage with the shipping company on your behalf.

5.3. We recommend that at least two adults work together to install this lift. Some parts of your lift are quite heavy and having

two or more people assemble your lift reduces the risk of injury. Affordable Lifts is not responsible for injuries that occur

while installing or utilizing your lift.

5.4. Most customers prefer their lift be oriented for straight-through travel. This means entering one side of the lift (right or left)

going up and then continuing out the other side (right or left). Sometimes this is not practical. If you are using a wheelchair

or walker, remember to allow adequate space to navigate onto and off of your lift's Platform.

5.5. We recommend that if possible, the Column side of the lift be installed closest to a nearby wall. If bracing is desired, then

this positioning will make bracing easier.

5.6. Before you begin:

!"The installation site should be flat and level, or you should be prepared to use steel or plastic shims to level

your lift.

!"The installation site should be clear of debris and as accessible as possible.

!"Your lift weighs approximately 450 lbs and it has a Platform weight capacity of 500 lbs. Be sure that the floor of your

installation location can support this combined weight.

!"The lift should sit on a solid surface (concrete, asphalt, solid flooring, etc) or substantial pavers. Anchoring on asphalt

installation requires inserting steel anchors into an epoxied hole.

!"Pinch point protection should already be installed.

!"If you remove a section of a landing railing then, if the landing is high enough you should install a safety gate in its place.

!"Children and pets should be excluded from the area during installation.

Affordable Lift -

Preassembled

Spray Paint Can

Wheel Kit - Standard

Wheels

Left Side Ramp

42.0"x52.0"x88.8", Gloss

Black

Rustoleum Protective Enamel,

Gloss Black, 12 oz

8"x2.5"

5/8"-11x4"

A16"xB33"xC2.75", Gloss

Black