AFFORDABLE LIFTS KCSPM3648 조립 및 설치 매뉴얼 - 페이지 7
{카테고리_이름} AFFORDABLE LIFTS KCSPM3648에 대한 조립 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AFFORDABLE LIFTS KCSPM3648 15 페이지. Affordable lift
4
5
6
3500009
7
MW82.5x 0.625xX Wheel Kit - Bolts
6000111
8
A16B33C2.75
5. Prepare to Assemble and Install Your Lift
5.1. We Are Here To Help: We would much rather have you call us for help than have you install your lift incorrectly. Your
lift's serial number is E9997. If you have questions or problems during assembly please call Customer Support at (USA)
434-515-2321 (Provide your Serial Number 'E9997' and contact information when you call).
5.2. Receiving Your Lift: If damage has occurred during shipping immediately document it with photographs and notify our
Shipping Department at (USA) 434-207-8444 (Provide your Serial Number 'E9997' and contact information when you call).
Check your lift for damage before signing the papers with the delivery man, when applicable. If there is damage, note it on
the delivery paperwork appropriately and notify Affordable Lifts. If damage is found after the delivery papers are signed,
we will not be able to file a claim for the damage with the shipping company on your behalf.
5.3. We recommend that at least two adults work together to install this lift. Some parts of your lift are quite heavy and having
two or more people assemble your lift reduces the risk of injury. Affordable Lifts is not responsible for injuries that occur
while installing or utilizing your lift.
5.4. Most customers prefer their lift be oriented for straight-through travel. This means entering one side of the lift (right or left)
going up and then continuing out the other side (right or left). Sometimes this is not practical. If you are using a wheelchair
or walker, remember to allow adequate space to navigate onto and off of your lift's Platform.
5.5. We recommend that if possible, the Column side of the lift be installed closest to a nearby wall. If bracing is desired, then
this positioning will make bracing easier.
5.6. Before you begin:
!"The installation site should be flat and level, or you should be prepared to use steel or plastic shims to level
your lift.
!"The installation site should be clear of debris and as accessible as possible.
!"Your lift weighs approximately 450 lbs and it has a Platform weight capacity of 500 lbs. Be sure that the floor of your
installation location can support this combined weight.
!"The lift should sit on a solid surface (concrete, asphalt, solid flooring, etc) or substantial pavers. Anchoring on asphalt
installation requires inserting steel anchors into an epoxied hole.
!"Pinch point protection should already be installed.
!"If you remove a section of a landing railing then, if the landing is high enough you should install a safety gate in its place.
!"Children and pets should be excluded from the area during installation.
Affordable Lift -
Preassembled
Spray Paint Can
Wheel Kit - Standard
Wheels
Left Side Ramp
42.0"x52.0"x88.8", Gloss
Black
Rustoleum Protective Enamel,
Gloss Black, 12 oz
8"x2.5"
5/8"-11x4"
A16"xB33"xC2.75", Gloss
Black
1
1
2
2
1