AFG 13.0AT Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Laufband AFG 13.0AT herunter. AFG 13.0AT 20 Seiten.
Auch für AFG 13.0AT: Benutzerhandbuch (19 seiten)

AFG 13.0AT Benutzerhandbuch
ii ¸ _/
i¸¸ i _
13.0AT
Rev.l.7.indd
8-9
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONEbolt. NOTE:A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
BOLT (A)
15turn
Qty:6
SPRING W ASHER (B)
8.2mm
Qty:6
ARC WASHER ( C)
8.4mm
Qty: 6
BASEFRAME
A OpenPINKHARDWAREBAG.
B
Connect the CONSOLE WIRES
from the BASEFRAMEto the
bottom of the CONSOLE MAST.
C
Attach LEFTCONSOLE MAST
using 3 BOLTS(A), 3 SPRING
WASHERS (B) and 3 ARC
WASHERS
(C).
D Repeat on other side.
......................
................
...............................
_,_..._..
?...._,,
:_
MOTE,
ee refu/ not to pinch any
wireswhileassembling themastsl
Screws and bolts are in place
and partiafly threa
any ONE sCrewor bolt.
BOLT ( B)
20 rnrn
Qty: 2
BOLT (D)
/
2
CONSOLEWIRES
A OpenBLUEHARDWARE BAG.
B Connect the CONSOLE WIRES
from the CONSOLE to those from
the top of the MAST.
C Attach CONSOLE to the
CONSOLE MASTS using
1 BOLT(D).
D Repeat on other side.
E Tighten aft console bolts.
F Snap each of the CUPHOLDERS
firmly into the CONSOLE.
NOTE: Be carefu!not topinchany
*NOTE: During console
assernb_ ensure that ALL
screws and bolts are in place
before cornpletely tightening
any ONEscrew or bolt.
B
4/1/08
3:41:02
PM