AFG 13.0AT Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Treadmill AFG 13.0AT. AFG 13.0AT 20 halaman.
Juga untuk AFG 13.0AT: Panduan Pengguna (19 halaman)

Halaman Cetak

ii ¸ _/

i¸¸ i _

13.0AT

Rev.l.7.indd

8-9

NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before

completely tightening any ONEbolt. NOTE:A light application of grease may aid in the installation of hardware.

Any grease, such as lithium bike grease is recommended.

BOLT (A)

15turn

Qty:6

SPRING W ASHER (B)

8.2mm

Qty:6

ARC WASHER ( C)

8.4mm

Qty: 6

BASEFRAME

A OpenPINKHARDWAREBAG.

Connect the CONSOLE WIRES

from the BASEFRAMEto the

bottom of the CONSOLE MAST.

Attach LEFTCONSOLE MAST

using 3 BOLTS(A), 3 SPRING

WASHERS (B) and 3 ARC

WASHERS

(C).

D Repeat on other side.

......................

................

...............................

_,_..._..

?...._,,

MOTE,

ee refu/ not to pinch any

wireswhileassembling themastsl

Screws and bolts are in place

and partiafly threa

any ONE sCrewor bolt.

BOLT ( B)

20 rnrn

Qty: 2

BOLT (D)

CONSOLEWIRES

A OpenBLUEHARDWARE BAG.

B Connect the CONSOLE WIRES

from the CONSOLE to those from

the top of the MAST.

C Attach CONSOLE to the

CONSOLE MASTS using

1 BOLT(D).

D Repeat on other side.

E Tighten aft console bolts.

F Snap each of the CUPHOLDERS

firmly into the CONSOLE.

NOTE: Be carefu!not topinchany

*NOTE: During console

assernb_ ensure that ALL

screws and bolts are in place

before cornpletely tightening

any ONEscrew or bolt.

4/1/08

3:41:02