GREAT PLANES Spirit 100 Gebrauchsanweisung - Seite 13
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Spielzeug GREAT PLANES Spirit 100 herunter. GREAT PLANES Spirit 100 20 Seiten.
❏
2. If you will be using the spoiler option make a servo arm
that has the outer hole at least 5/8" [16mm] from the servo
mounting hole. Enlarge the outer hole with a 5/64" drill bit.
❏
3. Mount the rudder and elevator servos with the hardware
provided with the servos. If you will be using spoilers install
the spoiler servo also. NOTE: The spoiler servo mounts as far
right as it will go in the servo tray.
❏
4. Plug the servos and battery into your receiver. Turn on
the transmitter to center the servos. Attach the servo arms
to the servos as shown in the sketch.
❏
5. Center the elevator and mark the pushrod where it
crosses the hole in the servo arm.
❏
6. Bend the pushrod 90° up at the mark you made.
5/64" [2mm]
5/8" [16mm]
Spoiler
Rudder Elevator
(Optional)
❏
7. Attach the pushrod to the servo arm with a Faslink.
Trim the excess pushrod from flush with the Faslink.
❏
8. Attach the rudder pushrod in the same manner you did
the elevator.
❏
9. If you will be using spoilers slide the spoiler activation
rod forward through the hole in the former at the front of the
wing opening.
13