GREAT PLANES Spirit 100 사용 설명서 - 페이지 13

{카테고리_이름} GREAT PLANES Spirit 100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES Spirit 100 20 페이지.

❏

2. If you will be using the spoiler option make a servo arm

that has the outer hole at least 5/8" [16mm] from the servo

mounting hole. Enlarge the outer hole with a 5/64" drill bit.

❏

3. Mount the rudder and elevator servos with the hardware

provided with the servos. If you will be using spoilers install

the spoiler servo also. NOTE: The spoiler servo mounts as far

right as it will go in the servo tray.

❏

4. Plug the servos and battery into your receiver. Turn on

the transmitter to center the servos. Attach the servo arms

to the servos as shown in the sketch.

❏

5. Center the elevator and mark the pushrod where it

crosses the hole in the servo arm.

❏

6. Bend the pushrod 90° up at the mark you made.

5/64" [2mm]

5/8" [16mm]

Spoiler

Rudder Elevator

(Optional)

❏

7. Attach the pushrod to the servo arm with a Faslink.

Trim the excess pushrod from flush with the Faslink.

❏

8. Attach the rudder pushrod in the same manner you did

the elevator.

❏

9. If you will be using spoilers slide the spoiler activation

rod forward through the hole in the former at the front of the

wing opening.