GREAT PLANES Spirit 100 사용 설명서 - 페이지 14

{카테고리_이름} GREAT PLANES Spirit 100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GREAT PLANES Spirit 100 20 페이지.

❏

10. Attach the Z-bend end of the spoiler activation rod to

the spoiler servo.

Final Radio Installation

❏

1. Attach the switch, charge jack, servos and servo

extensions to the receiver. Wrap the receiver in foam.

❏

2. Push the receiver into the bottom of the fuse and retain

it with a small piece of Velcro

❏

3. Drill a 1/16" [1.6mm] hole through the fuse side for the

antenna. Take a cut-off piece of servo arm with at least two

holes in it, and feed the antenna through two of the holes,

making a strain relief which protects the antenna from

accidentally being torn out of the receiver. Position the strain

relief so that there is a small amount of slack between the

receiver and the when the strain relief is positioned against

the inside of the fuse.

❏

4. Mount your switch in the canopy area with silicone glue,

making sure it does not interfere with the pushrods or canopy.

❏

1. Wrap the receiver battery in foam and tape. Tape the

battery to the outside of the fuse. NOTE: The battery will be

installed after the CG is set.