- ページ 14

おもちゃ GREAT PLANES Spirit 100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。GREAT PLANES Spirit 100 20 ページ。

GREAT PLANES Spirit 100 取扱説明書
10. Attach the Z-bend end of the spoiler activation rod to
the spoiler servo.

Final Radio Installation

1. Attach the switch, charge jack, servos and servo
extensions to the receiver. Wrap the receiver in foam.
2. Push the receiver into the bottom of the fuse and retain
it with a small piece of Velcro
®
.
3. Drill a 1/16" [1.6mm] hole through the fuse side for the
antenna. Take a cut-off piece of servo arm with at least two
holes in it, and feed the antenna through two of the holes,
making a strain relief which protects the antenna from
accidentally being torn out of the receiver. Position the strain
relief so that there is a small amount of slack between the
receiver and the when the strain relief is positioned against
the inside of the fuse.
4. Mount your switch in the canopy area with silicone glue,
making sure it does not interfere with the pushrods or canopy.
1. Wrap the receiver battery in foam and tape. Tape the
battery to the outside of the fuse. NOTE: The battery will be
installed after the CG is set.
14

Set the C.G.