HIBLOW hp-120 Gebrauchsanweisung - Seite 8

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Luftkompressor HIBLOW hp-120 herunter. HIBLOW hp-120 13 Seiten.
Auch für HIBLOW hp-120: Handbuch (9 seiten)

Seite drucken

Fig. 4

Screwdriver

inserting

position

Frame cover

Replacing Diaphragm mounting block

After removing Head (Casing) block, remove one of the hex nut (U-lock nut) and washer in the

center of the diaphragm.

Remove one of the Diaphragm mounting blocks from the Rod, and pull out the other Diaphragm

mounting block from the pump body together with the Rod without loosening its hex nut (U-lock

nut) and washer. (Refer to Fig.5- )

Then remove the other Diaphragm mounting block from the Rod. (Refer to Fig.5- )

Reattach a new Diaphragm mounting block on one side of the Rod with new hex nut (U-lock nut)

and washer, insert the Rod in accordance with the procedure reverse to that performed when the

Rod was removed the pump.

Reattach washer and new hex nut (U-lock nut) to Rod screw protruding through other Diaphragm

mounting block and tighten.

Fig. 5

Screw

Sound absorber

Screw

(Refer to Fig.5)

Diaphragm

mounting block

Diaphragm mounting block

Upper housing

Screw

Hose band

L-tube

Screw

Head (Casing) B

Washer

U-lock nut

L-tube

Head (Casing) block

Head (Casing) A

Valve chamber packing

Rod