Daytona 80458 Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Motor Daytona 80458 herunter. Daytona 80458 18 Seiten. Finger-follower dohc 4valve cylinderhead upgrade kit, engine narrow pitch
Seite drucken3. CYLINDER HEAD
12~15N-m
#34. WASHER, SEALING 10mm
#1. CYLINDER HEAD ASSY.
#32. CAPNUT, FLANGE M6 (4)
Install the set screw on the exhaust flange of the cylinder head.
Set the dowel pin (8X14) in the dowel pin hole on the cylinder.
Install the cylinder head gasket.
Install the cylinder head assembly. Put the M6 nut on the stud bolt installed on the cylinder.
Install the cylinder head assembly using the sealing washer and flange cap nut.
<When tightening the flange cap nut, tighten it in diagonal order.>
Tighten the M6 nut next to the cylinder head and the bolt next to the cylinder
to the specified torque.
#11. UNION, 8mm (for BREATHER)
#12. BOLT, M10
#35. WASHER, SEALING 6mm (4)
12N-m
#30. SET SCREW, HEX SOCKET (2)
#17. GASKET, CYLINDER HEAD
#25. PIN, DOWEL 8X14 (2)
Tighten after tightening the cylinder head cap nut
#33. NUT M6
Tighten after tightening the cylinder head cap nut
10N-m
LOCK
80458 PAGE 6/9
STOCK
10N-m
8N-m
2021/06/21