Daytona 80458 사용 설명서 - 페이지 6

{카테고리_이름} Daytona 80458에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Daytona 80458 18 페이지. Finger-follower dohc 4valve cylinderhead upgrade kit, engine narrow pitch

페이지 인쇄

3. CYLINDER HEAD

12~15N-m

#34. WASHER, SEALING 10mm

#1. CYLINDER HEAD ASSY.

#32. CAPNUT, FLANGE M6 (4)

Install the set screw on the exhaust flange of the cylinder head.

Set the dowel pin (8X14) in the dowel pin hole on the cylinder.

Install the cylinder head gasket.

Install the cylinder head assembly. Put the M6 nut on the stud bolt installed on the cylinder.

Install the cylinder head assembly using the sealing washer and flange cap nut.

Tighten the M6 nut next to the cylinder head and the bolt next to the cylinder

to the specified torque.

#11. UNION, 8mm (for BREATHER)

#12. BOLT, M10

#35. WASHER, SEALING 6mm (4)

12N-m

#30. SET SCREW, HEX SOCKET (2)

#17. GASKET, CYLINDER HEAD

#25. PIN, DOWEL 8X14 (2)

Tighten after tightening the cylinder head cap nut

#33. NUT M6

Tighten after tightening the cylinder head cap nut

10N-m

LOCK

80458 PAGE 6/9

STOCK

10N-m

8N-m

2021/06/21