EmergoPlus PowerXtreme XS230 Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Inverter EmergoPlus PowerXtreme XS230 herunter. EmergoPlus PowerXtreme XS230 15 Seiten. Solar set
Seite drucken
User manual Solar set XS
If the mutual distance is too large, you can use the included solar
cable to make the connection. The solar cable can be installed
into the included cable duct. Perform installation conform the
gluing instruction in paragraph 3.5.
3.3
Mounting Solar panel
Determine the exact position of the spoiler profiles on the
▪
roof by laying them down on the roof, together with the
panel. Mark the position of the spoiler profiles by use of a
marker or tape.
Glue both spoiler profiles to the spot marked on the roof
▪
in accordance with the gluing prescription.
After curing of the glue, you can mount the solar panel.
▪
Mount the solar cables using the MC4 plugs to the solar
▪
panel. Make the cables as short as possible and tighten
both cable glands on the cable throughput.
Leg the solar panel op the spoiler profiles and fixate this
▪
by positioning of the 10 self-drilling screws.
CAUTION!
Beware that you do not place the screws too high in
the spoiler profile. The screw could damage the
bottom of solar panel!
E18-XSSolarset-EN-01
www.emergoplus.com
Page 9 of 15