EmergoPlus PowerXtreme XS230 사용자 설명서 - 페이지 9

{카테고리_이름} EmergoPlus PowerXtreme XS230에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. EmergoPlus PowerXtreme XS230 15 페이지. Solar set

EmergoPlus PowerXtreme XS230 사용자 설명서
User manual Solar set XS
If the mutual distance is too large, you can use the included solar
cable to make the connection. The solar cable can be installed
into the included cable duct. Perform installation conform the
gluing instruction in paragraph 3.5.
3.3

Mounting Solar panel

Determine the exact position of the spoiler profiles on the
roof by laying them down on the roof, together with the
panel. Mark the position of the spoiler profiles by use of a
marker or tape.
Glue both spoiler profiles to the spot marked on the roof
in accordance with the gluing prescription.
After curing of the glue, you can mount the solar panel.
Mount the solar cables using the MC4 plugs to the solar
panel. Make the cables as short as possible and tighten
both cable glands on the cable throughput.
Leg the solar panel op the spoiler profiles and fixate this
by positioning of the 10 self-drilling screws.
CAUTION!
Beware that you do not place the screws too high in
the spoiler profile. The screw could damage the
bottom of solar panel!
E18-XSSolarset-EN-01
www.emergoplus.com
Page 9 of 15