HiBoost F10G-CP Benutzerhandbuch - Seite 16
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Signalverstärker HiBoost F10G-CP herunter. HiBoost F10G-CP 20 Seiten. Cellular 3g signal booster
Seite druckenOscillation is caused when the indoor (distribution) antenna sends a
signal back into the outdoor (signal) antenna. Similar to a PA system,
when the microphone gets too close to the speaker it causes feedback.
This will occur if your antennas are too close together, or the indoor
antenna is pointed at the outdoor antenna. Make sure you have
adequate separation and some type of shielding between the antennas
(Usually your roof or a cement wall is good enough).
IMPORTANT NOTES
The 2 most important things to look for when setting up your system is:
A good input signal (the best you can find)
Isolating the outdoor (donor) antenna from the indoor
(server) antennas so they do not feedback into each
other.
By capturing the best input signal you will be able to enjoy the maximum
coverage and best quality signal inside where your Indoor antennas are
located. The better the input signal, the better the output signal. In order
to find the best input signal, you want to place your outdoor antenna as
high as possible with the least amount of obstruction between the
antenna and the cellular base tower. A clear line of site is ideal.