HiBoost F10G-CP Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat sinyal HiBoost F10G-CP. HiBoost F10G-CP 20 halaman. Cellular 3g signal booster

Oscillation is caused when the indoor (distribution) antenna sends a

signal back into the outdoor (signal) antenna. Similar to a PA system,

when the microphone gets too close to the speaker it causes feedback.

This will occur if your antennas are too close together, or the indoor

antenna is pointed at the outdoor antenna. Make sure you have

adequate separation and some type of shielding between the antennas

(Usually your roof or a cement wall is good enough).

IMPORTANT NOTES

The 2 most important things to look for when setting up your system is:

A good input signal (the best you can find)

Isolating the outdoor (donor) antenna from the indoor

(server) antennas so they do not feedback into each

other.

By capturing the best input signal you will be able to enjoy the maximum

coverage and best quality signal inside where your Indoor antennas are

located. The better the input signal, the better the output signal. In order

to find the best input signal, you want to place your outdoor antenna as

high as possible with the least amount of obstruction between the

antenna and the cellular base tower. A clear line of site is ideal.