DynaGen GSC200 Installations- und Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Controller DynaGen GSC200 herunter. DynaGen GSC200 11 Seiten. Auto start engine & transfer switch controller

Seite drucken

Operating Voltage:

Operating Temperature:

Front Panel Indications

-High intensity LED's with regulated brightness

LCD Display:

- LCD display for hour meter.

Adjustments

Warm-up:

Cool-Down:

Crank Disconnect:

Overspeed:

Underspeed:

Crank Rest:

Delay on Start:

Crank Tries:

Failure Bypass:

Low Battery Indication:

Operating & Installation Manual for the GSC200 Controller

SPECIFICATIONS FOR THE GSC200

7 to 30VDC continuous

Zero volts operation for 100mS (assumes supply was 12VDC before

initiating starting)

-40 ºC to +85 ºC (LCD Display operates from to -16 ºC to 70 ºC)

0 - 200 seconds (After Failure Bypass Feature)

0 - 300 seconds (in 5 second increments)

12 to 140Hz

40 – 200Hz

4 - 32 seconds (GREEN Engine Run LED will flash during Crank Rest)

0 – 59 seconds (GREEN Engine Run LED will flash during Delay on Start)

1 to 10

10 – 55 seconds

7 – 35 VDC