Greatneck 80154 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Bohrer Greatneck 80154 herunter. Greatneck 80154 16 Seiten. 3/8" drill

Seite drucken

WARNING:

proper circuit protection.

The drill is wired at the factory for 120 V operation. It must be connected to a 120 V,

15 A time delayed fuse or circuit breaker. To avoid shock or fire, replace power cord

immediately if it is worn, cut or damaged in any way.

ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA

FLYING DEBRIS can cause permanent eye damage. Prescription

eyeglasses ARE NOT a replacement for proper eye protection.

WARNING:

during operation of a power tool.

GENERAL SAFETY RULES

WARNING:

all instructions. Failure to follow all

instructions listed below may result in

electric shock, fire and/or serious personal

injury.

WORK AREA

Keep your work area clean and well lit.

Cluttered benches and dark areas invite

accidents.

Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gas or dust. Power

tools create sparks which may ignite the

dust or fumes.

Keep bystanders, children and visitors

away while operating the tool.

Distractions can cause you to lose control.

To avoid electrical hazards, fire hazards or damage to the drill, use

POWER TOOL SAFETY

REQUIREMENTS or ANSI SAFETY STANDARD Z87.1

Non-compliant eyewear can cause serious injury if broken

Read and understand

SAVE THESE INSTRUCTIONS FOR REFERENCE

ELECTRICAL SAFETY

Double insulated tools are equipped

with a polarized plug (one blade is wider

than the other). This plug will fit in a

polarized plug only one way. If the plug

does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a

qualified electrician to install a polarized

outlet. Do not change the plug in any

way. Double insulation eliminates the need

for the three-

prong grounded power cord

and grounded power supply system.

Avoid body contact with grounded

surfaces such as pipes, radiators,

ranges and refrigerators. There is

increased risk of electric shock if your body

is grounded.

Don't expose power tools to rain or wet

conditions. Water entering the power tool

will increase the risk of electric shock.