Greatneck 80154 Руководство пользователя - Страница 3
Просмотреть онлайн или скачать pdf Руководство пользователя для Сверло Greatneck 80154. Greatneck 80154 16 страниц. 3/8" drill
Печатать страницуWARNING:
!
proper circuit protection.
The drill is wired at the factory for 120 V operation. It must be connected to a 120 V,
15 A time delayed fuse or circuit breaker. To avoid shock or fire, replace power cord
immediately if it is worn, cut or damaged in any way.
ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA
FLYING DEBRIS can cause permanent eye damage. Prescription
eyeglasses ARE NOT a replacement for proper eye protection.
WARNING:
!
during operation of a power tool.
GENERAL SAFETY RULES
WARNING:
!
all instructions. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious personal
injury.
WORK AREA
Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gas or dust. Power
tools create sparks which may ignite the
dust or fumes.
Keep bystanders, children and visitors
away while operating the tool.
Distractions can cause you to lose control.
To avoid electrical hazards, fire hazards or damage to the drill, use
POWER TOOL SAFETY
REQUIREMENTS or ANSI SAFETY STANDARD Z87.1
Non-compliant eyewear can cause serious injury if broken
Read and understand
SAVE THESE INSTRUCTIONS FOR REFERENCE
ELECTRICAL SAFETY
Double insulated tools are equipped
with a polarized plug (one blade is wider
than the other). This plug will fit in a
polarized plug only one way. If the plug
does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician to install a polarized
outlet. Do not change the plug in any
way. Double insulation eliminates the need
for the three-
prong grounded power cord
and grounded power supply system.
Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges and refrigerators. There is
increased risk of electric shock if your body
is grounded.
Don't expose power tools to rain or wet
conditions. Water entering the power tool
will increase the risk of electric shock.
3