Greatneck 80161 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Säge Greatneck 80161 herunter. Greatneck 80161 18 Seiten. High speed circular saw

WARNING:

"POWER TOOL SAFETY",

"SPECIFIC SAFETY RULES",

"EXTENSION CORD GUIDELINES"

and "SYMBOLS" on pages 3, 4, 5,

6, 7, & 8 of this Manual? If not,

please do it now before you operate

this circular saw. Your safety

depends on it!

Every time you use the circular saw

you should verify the following:

Blade is tight and sharp.

All adjustments are tight.

Workpiece is properly secured.

Safety glasses are being worn.

Failure to adhere to these safety

rules can greatly increase the

chances of injury.

ASSEMBLY AND OPERATION

Have you read

LOCK-OFF BUTTON

The lock-off button (1) is a safety device

designed to reduce the possibility of

accidentally starting the saw (Fig. 7). This

button must be depressed before the

trigger switch (2) can be depressed.

TRIGGER SWITCH

To turn the saw ON, depress the lock-

off button with your right thumb.

While holding the lock-off button in the

depressed position, squeeze the

trigger switch to start the saw.

Once the saw starts, release the lock-

off button. The saw will remain running

until the trigger switch is released.

To turn the saw OFF, release the

trigger switch.

NOTE: To re-start the saw, the lock-off

button must be depressed again

before the trigger switch is squeezed.

Fig. 7