- ページ 13
ソウ Greatneck 80161のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Greatneck 80161 18 ページ。 High speed circular saw
ページを印刷する
!
WARNING:
"POWER TOOL SAFETY",
"SPECIFIC SAFETY RULES",
"EXTENSION CORD GUIDELINES"
and "SYMBOLS" on pages 3, 4, 5,
6, 7, & 8 of this Manual? If not,
please do it now before you operate
this circular saw. Your safety
depends on it!
Every time you use the circular saw
you should verify the following:
Blade is tight and sharp.
All adjustments are tight.
Workpiece is properly secured.
Safety glasses are being worn.
Failure to adhere to these safety
rules can greatly increase the
chances of injury.
ASSEMBLY AND OPERATION
Have you read
LOCK-OFF BUTTON
The lock-off button (1) is a safety device
designed to reduce the possibility of
accidentally starting the saw (Fig. 7). This
button must be depressed before the
trigger switch (2) can be depressed.
TRIGGER SWITCH
1.
To turn the saw ON, depress the lock-
off button with your right thumb.
2.
While holding the lock-off button in the
depressed position, squeeze the
trigger switch to start the saw.
3.
Once the saw starts, release the lock-
off button. The saw will remain running
until the trigger switch is released.
4.
To turn the saw OFF, release the
trigger switch.
NOTE: To re-start the saw, the lock-off
button must be depressed again
before the trigger switch is squeezed.
13
Fig. 7