DynaGen ES53 Installations- und Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Kontrolleinheit DynaGen ES53 herunter. DynaGen ES53 18 Seiten. Control module

Seite drucken

DIP SWITCH 4: Configures the system for either 50Hz or 60Hz. The switch should be in the

ON position or UP, for a 60Hz system. The switch should be in the OFF position, or DOWN for

a 50Hz system.

DIP SWITCH 5: This switch should be left in the OFF position or DOWN for the ES53.

Switch 5 configures proper filtering for AC generator sensing.

DIP SWITCH 6: DIP switch 6 enables and disables the Time Delay Normal to Emergency

(TDNE) feature. To enable the TDNE function, the DIP switch should be in the ON or UP

position. To disable the TDNE function, the DIP switch should be in the OFF or DOWN

position.

DIP SWITCH 7: DIP switch 7 enables the Time Delay Engine Start (TDES/Preheat). To enable

the TDES/Preheat function, the DIP switch should be in the ON or UP position. To disable the

TDES/Preheat function, the DIP switch should be in the OFF or DOWN position.

DIP SWITCH 8: DIP switch 8 enables the Time Delay Engine Cooldown (TDEC) and the Time

Delay Emergency to Normal (TDEN). To enable the TDEC and TDEN function, the DIP switch

should be in the ON or UP position. To disable the TDEC and TDEN function, the DIP switch

should be in the OFF or DOWN position.

DIP SWITCH 9: Not Used

The following timers are included as standard in the ES53, one of which is adjustable. Special

time settings are available from the factory.

1: TDES: Time Delay Engine Start: Adjustable from 0 to 32 Seconds. This delay is necessary to

prevent unnecessary engine starts. This delay also doubles as a preheat timer by utilizing

terminal number 12 for diesel glow-plugs, if necessary.

2: TDNE: Time Delay, Normal to Emergency: 4 seconds & 55 Hz. This allows the engine to

stabilize before load transfer. This delay waits 4 seconds and then proceeds to very the engine

has reached a frequency of 55Hz before transferring.

3: TDEN: Time Delay, Emergency to Normal: 3 minutes. This allows a delay after the utility

returns, to insure it has indeed returned and stabilized.

4: TDEC: Time Delay, Engine Cool: 5 minutes. This allows the engine to continue running for

a set time after re-transfer of load to the utility, to circulate coolant for a safe cool-down.

Installation and User Manual for the ES53 Control Module

TIMER FUNCTIONS