GReddy TYPE-RS BRS-610 GDB Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Zubehör für Kraftfahrzeuge GReddy TYPE-RS BRS-610 GDB herunter. GReddy TYPE-RS BRS-610 GDB 8 Seiten. Rs-type adapter kit
Seite drucken
When venting the outlet to the atmosphere, depending on the application, the airflow meter
voltage can drop enough to stall the vehicle when the blow off valve is discharged.
If adjustment of the top screw cannot prevent the engine stall, install e-Manage system and use
the Anti Engine Stall feature or reroute the discharge outlet back into the intake system after
the airflow meter.
Warning
Warning
Warning
Warning
How to change the Attachment
How to change the Attachment
How to change the Attachment
How to change the Attachment
The attachment on the GReddy Type RS is interchangeable with discharge funnel or hose
attachment.
To remove the attachment, turn it counter clock wise, and to install turn it clock wise.
When changing the attachment, place the O-ring to the attachment being installed and tighten
until the attachment flange meets the blow of body.
Apply silicone grease before reinstalling the O-ring.
※
O-ring will not require excessive force to seal properly, so please be careful not to over
※
tighten the attachment.
Adapter
If the engine stalls while operating the vehicle, the steering and the
Brakes will not operate properly and can be very dangerous.
O-Ring
Attachment flange
8－
－
O-Ring