GReddy TYPE-RS BRS-610 GDB 사용 설명서 - 페이지 8

{카테고리_이름} GReddy TYPE-RS BRS-610 GDB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GReddy TYPE-RS BRS-610 GDB 8 페이지. Rs-type adapter kit

When venting the outlet to the atmosphere, depending on the application, the airflow meter

voltage can drop enough to stall the vehicle when the blow off valve is discharged.

If adjustment of the top screw cannot prevent the engine stall, install e-Manage system and use

the Anti Engine Stall feature or reroute the discharge outlet back into the intake system after

the airflow meter.

Warning

How to change the Attachment

The attachment on the GReddy Type RS is interchangeable with discharge funnel or hose

attachment.

To remove the attachment, turn it counter clock wise, and to install turn it clock wise.

When changing the attachment, place the O-ring to the attachment being installed and tighten

until the attachment flange meets the blow of body.

Apply silicone grease before reinstalling the O-ring.

※

O-ring will not require excessive force to seal properly, so please be careful not to over

※

tighten the attachment.

Adapter

If the engine stalls while operating the vehicle, the steering and the

Brakes will not operate properly and can be very dangerous.

O-Ring

Attachment flange

8－

－

O-Ring