Dynalink RTA1335 Handbuch zur Schnelleinrichtung - Seite 3

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Netzwerk-Router Dynalink RTA1335 herunter. Dynalink RTA1335 16 Seiten. Adsl2+ 4-port modem router
Auch für Dynalink RTA1335: Broschüre & Specs (3 seiten)

Seite drucken
ADSL 2+ 4-Port Modem Router Quick Set-up Guide
1
Default Configuration for New Zealand
This Router is shipped with the following factory default settings.
Router IP address
Subnet mask
VPI
VCI
Connect mode
NAT
DSL line mode
WAN IP
DHCP
DNS relay
UPnP IGD
Firewall:
Incoming requests
Outgoing traffic
Router configuration & management:
User name
Password
Telnet password
The majority of users in New Zealand will be able to connect using the default
factory setting. They can skip Section 6 of this Guide. Only if your ISP advises
explicitly that you have a "PPPoE service", then you need to follow Section 6.
2

Before you start

Make sure your computer has these installed:
Ethernet port
TCP/IP protocol enabled
A web browser, Internet Explorer 5.x/Firefox1.x/Netscape 6 or better.
Obtain your Internet account information from your ISP:
Login user name and password
Public IP address (only if you subscribe for static IP)
DNS server IP (only if specified by ISP).
192.168.1.1
255.255.255.0
0
100
PPPoA VC-MUX
enabled
G.DMT
dynamic
enabled
on
enabled
blocked
not blocked
admin
admin
admin