Dynalink RTA1335 Panduan Pengaturan Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Router Jaringan Dynalink RTA1335. Dynalink RTA1335 16 halaman. Adsl2+ 4-port modem router
Juga untuk Dynalink RTA1335: Brosur & Spesifikasi (3 halaman)

Halaman Cetak

ADSL 2+ 4-Port Modem Router Quick Set-up Guide

Default Configuration for New Zealand

This Router is shipped with the following factory default settings.

Router IP address

Subnet mask

VPI

VCI

Connect mode

NAT

DSL line mode

WAN IP

DHCP

DNS relay

UPnP IGD

Firewall:

Incoming requests

Outgoing traffic

Router configuration & management:

User name

Password

Telnet password

The majority of users in New Zealand will be able to connect using the default

factory setting. They can skip Section 6 of this Guide. Only if your ISP advises

explicitly that you have a "PPPoE service", then you need to follow Section 6.

Before you start

Make sure your computer has these installed:

Ethernet port

TCP/IP protocol enabled

A web browser, Internet Explorer 5.x/Firefox1.x/Netscape 6 or better.

Obtain your Internet account information from your ISP:

Public IP address (only if you subscribe for static IP)

DNS server IP (only if specified by ISP).

192.168.1.1

255.255.255.0

100

PPPoA VC-MUX

enabled

G.DMT

dynamic

enabled

blocked

not blocked

admin