Gree 13-04661 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Klimagerät Gree 13-04661 herunter. Gree 13-04661 20 Seiten. Mobile air conditioner

Usage environmental temperature of this unit is 16 °C ~ 35°C.

Cool

1 Install heat discharge pipe well, select a location near door and window, connect the

heat discharge pipe to outside and note to leave an air return vent such as a window or

door to guarantee the indoor air return normal.

2 After press "ON/OFF" to turn on unit and pressed MODE to select cool mode,cool

indicated light on and unit runs in cooling way.

3 Press SPEED to select proper fan speed (High/Medium/Low).

4 Turn on the switch firstly, approve to run in COOL mode ,then initial fan speed is high.

Note

While COOL is running, in order to raise cooling effect, please: Draw up cur-

tain to prevent sunshine from shining into the air conditioning room: Prevent

setting other heat source in the room.

Compressor delay protect

No matter under what circumstance after electrified, the interval between twice

start of compressor should not be less than 3 minutes; after started, compressor

will not stop by the change of temp. in 6 minutes.

Dry

Closed doors and windows can get better dry effect.Press

the unit and MODE is selected DRY,then cool and dry indicated lights are on

and unit runs in dry mode.

Note

When drying, indoor fan motor runs in low speed, compressor and outdoor fan

motor run continuously, set te- mperature will not be displayed and is not adjus-

table.Discharge pipe is unnecessary to be installed.

Fan

Press

to turn on unit and select FAN by SPEED, indoor fan motor can

"ON/OFF"

run in 3 speeds of High, Medium and low, set temperature will not be displayed

and is not adjusable, High,Medium or low symbol will be displayed in display

window according to speed of indoor fan.

Environmental temperature

to turn on

"ON/OFF"