AFG 2.0AS Assembly and Montage- und Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Montage- und Benutzerhandbuch für Heim-Fitnessstudio AFG 2.0AS Assembly and herunter. AFG 2.0AS Assembly and 15 Seiten. Afg series
Auch für AFG 2.0AS Assembly and: Montage- und Benutzerhandbuch (16 seiten)
Seite drucken
CABLE "A"
LEFT SUPPORT FRAME
LAT PULLDOWN BAR
LARGE "O" RING
CENTER SUPPORT FRAME
WATER BOTTLE HOLDER
CABLE "B"
SEAT HEAD PAD
HANDLES
RADIAL ARM ADJUSTMENT PIN
SEAT BACK PAD
SEAT BACK ADJUSTMENT KNOB
BICEP CURL BAR
SEAT BOTTOM PAD
SEAT WELDMENT
LEG EXTENSION/CURL DOWN TUBE
ADJUSTMENT BAR
SEAT HEIGHT ADJUSTMENT KNOB
FOAM ROLLERS
ADJUSTABLE FOOTPLATE
TOOLS INCLUDED
19 mm Flat Wrench
13 mm/17 mm Flat Wrench
PARTS INCLUDED
1 Bayonet
1 Bicep Curl Bar
1 Seat Back Pad
1 Base Frame
1 Left Support Frame
1 Right Support Frame
1 Seat Back Adjustment Bar
1 Radial Arm Assembly
1 Exercise Flipbook
2 Seat Adjustment Pins
1 Leg Roller Support Tube
1 Water Bottle Holder
1 Seat Bottom Adjustment Bar
If you have questions or if there are any missing parts, contact Customer Tech Support.
Contact information is located on the back panel of this manual.
For a complete exploded diagram, visit us at www.advancedfitnessgroup.com
2.0AS_Rev.1.5.indd 6-7
UPPER PULLEY ASSEMBLY
DUAL FLOATING PULLEY BRACKET
RADIAL ARM ASSEMBLY
WEIGHT SELECTION PIN
RIGHT SUPPORT FRAME
SINGLE FLOATING PULLEY BRACKET
SEAT ASSEMBLY SAFETY PIN
4 mm Allen Wrench
6 mm Allen Wrench
5 mm Allen Wrench
1 Center Support Frame
2 Single Floating Pulley Bracket
1 Seat Weldment
1 Upper Pulley Assembly
2 Weight Shrouds
1 Seat Bottom Pad
2 Guide Rods
1 Nylon Ankle Strap
1 Weight Selection Pin
2 Handles
1 5 lb. Increment Weight
1 Lat Pulldown Bar
1 Dual Floating Pulley Bracket
10 Hardware Bags
1 Set Of Weight Plate Decals
2 Foam Rollers
1 Center Connection Tube
1 Seat Head Pad
1 Lower Connection Tube
2 Side Connection Tubes
1 Lower Pulley Bracket
1 Upper Mounting Bracket
2 Upgrade Spacers
1 Lower Mounting Bracket
2 Accent Pieces
PRE- ASSEMBLY
NOTE:
During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONE bolt.
WEIGHT SHROUD
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike
grease is recommended.
CABLE "C"
GUIDE ROD
ASSEMBLY STEP 1
ACCENT PIECE
BAYONET
HARDWARE BAG 1 CONTENTS :
FLAT WASHER (C)
Qty: 4
BASE FRAME
CABLE "D"
CENTER
SUPPORT FRAME
BOLT (A)
FLAT
WASHER (C)
A
BOLT (A)
BOLT (B)
75 mm
95 mm
Qty: 2
Qty: 4
B
ARC WASHER (D)
NYLON
Qty: 8
NUT (E)
Qty: 6
C
LEFT SUPPORT FRAME
RIGHT SUPPORT FRAME
D
E
BOLT (B)
ARC WASHER (D)
ARC WASHER (D)
NYLON NUT (E)
BASE FRAME
LOWER PULLEY BRACKET
FLAT WASHER (C)
NYLON NUT (E)
Place BASE FRAME
on floor in desired
location.
Open HARDWARE BAG
1.
Attach RIGHT
SUPPORT FRAME to
right side of BASE
FRAME using 2 BOLTS
(B), 4 ARC WASHERS
(D) and 2 NYLON NUTS
(E).
Attach LEFT SUPPORT
FRAME to left side of
BASE FRAME using
2 BOLTS (B), 4 ARC
WASHERS (D) and 2
NYLON NUTS (E).
Attach CENTER
SUPPORT FRAME
and LOWER PULLEY
BRACKET to BASE
FRAME using 2 BOLTS
(A), 4 FLAT WASHERS
(C) and 2 NYLON NUTS
(E).
NOTE: Ensure that
the LOWER PULLEY
BRACKET is positioned
as shown in diagram.
9/23/08 10:14:12 AM