AFG 2.0AS Assembly and Montage- und Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Montage- und Benutzerhandbuch für Heim-Fitnessstudio AFG 2.0AS Assembly and herunter. AFG 2.0AS Assembly and 15 Seiten. Afg series
Auch für AFG 2.0AS Assembly and: Montage- und Benutzerhandbuch (16 seiten)
Seite drucken
AS SE MB LY ST EP
HARDWARE BAG CONTENTS :
DUAL FLOATING
PULLEY BRACKET
SINGLE FLOATING
PULLEY BRACKET
A
Open HARDWARE BAG .
B
Remove NUT, WASHERS, SCREW, HOOK, CLEVIS and BALL STOP from the end of CABLE D.
C
Install CABLE D as shown in diagram.
D
After CABLE D routing is complete replace BALL STOP, CLEVIS, HOOK, SCREW, WASHERS
and NUT on end of cable.
NOTE: Ensure the "O" RING is positioned at the end of CABLE D against the BALL STOP.
E
Attach CABLE D to PRE-ATTACHED LEG ExTENSION CABLE.
1
2.0AS_Rev.1.5.indd 16-17
CABLE D
Qty: 1
CABLE D
CABLE D
PRE-ATTACHED LEG EXTENSION CABLE
ASSEMBLY STEP 10
HARDWARE BAG 10 CONTENTS :
BOLT (R)
10 mm
Qty: 8
WEIGHT
SHROUD
LOWER MOUNTING
BRACKET
A
Open HARDWARE BAG 10.
B
Install WEIGHT SHROUDS as shown in diagram, using 8 BOLTS (R).
YOU'RE FINISHED!
UPPER MOUNTING
BRACKET
BOLT (R)
WEIGHT
SHROUD
1
9/23/08 10:15:07 AM