AFG 2.0AS Assembly and Montaj ve Kullanım Kılavuzu - Sayfa 9
Ev Spor Salonu AFG 2.0AS Assembly and için çevrimiçi göz atın veya pdf Montaj ve Kullanım Kılavuzu indirin. AFG 2.0AS Assembly and 15 sayfaları. Afg series
Ayrıca AFG 2.0AS Assembly and için: Montaj ve Kullanım Kılavuzu (16 sayfalar)
Sayfayı Yazdır
AS SE MB LY ST EP
HARDWARE BAG CONTENTS :
DUAL FLOATING
PULLEY BRACKET
SINGLE FLOATING
PULLEY BRACKET
A
Open HARDWARE BAG .
B
Remove NUT, WASHERS, SCREW, HOOK, CLEVIS and BALL STOP from the end of CABLE D.
C
Install CABLE D as shown in diagram.
D
After CABLE D routing is complete replace BALL STOP, CLEVIS, HOOK, SCREW, WASHERS
and NUT on end of cable.
NOTE: Ensure the "O" RING is positioned at the end of CABLE D against the BALL STOP.
E
Attach CABLE D to PRE-ATTACHED LEG ExTENSION CABLE.
1
2.0AS_Rev.1.5.indd 16-17
CABLE D
Qty: 1
CABLE D
CABLE D
PRE-ATTACHED LEG EXTENSION CABLE
ASSEMBLY STEP 10
HARDWARE BAG 10 CONTENTS :
BOLT (R)
10 mm
Qty: 8
WEIGHT
SHROUD
LOWER MOUNTING
BRACKET
A
Open HARDWARE BAG 10.
B
Install WEIGHT SHROUDS as shown in diagram, using 8 BOLTS (R).
YOU'RE FINISHED!
UPPER MOUNTING
BRACKET
BOLT (R)
WEIGHT
SHROUD
1
9/23/08 10:15:07 AM