Gainscha GA-S300 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drucker Gainscha GA-S300 herunter. Gainscha GA-S300 12 Seiten. 80mm thermal receipt printer

Seite drucken

6.1 LCD and Buttons function description：

A. Screen display information

1. standby mode

a. Upper left region：Represents the warning information of the current printer in the form of icon, and

does not display when no warning appears.

b. Upper right region：Displays the real-time temperature of the print head.

c. The area below：Display the printer's current status, warning, prompt message in the form of text.

2. State of options

Provides common printer function Settings.

3. Screen saver status

Reduce the brightness and move the company LOGO in a random direction.

Note: in standby mode, the printer and keys will automatically enter the screen saver after 30 seconds without any

action. Under the option state, the printer and keys will automatically return to standby state after 20 seconds and

enter the screen saver state after 10 seconds.

B. Layout of the buttons

There are three buttons, left to right: left button, middle button and right button.

C. Function of the button

1. Each button contains short and long press operations, which correspond to different functions in

different standby display states.

2. Standby mode：

left button

Short press: no operation.

Long press: display simple information of printer.

the right buttons

Short press: no operation.

Long press: enter the option state. Options are: self-check page printing, print concentration

debugging, print speed debugging, language selection, cutter selection, USB interface type, serial

port baud rate debugging;

Middle button

Short press: when the current printer has no printing task, the paper is about 5 mm;

Pause/continue printing while the printer is printing.

Long press: the current printer has no printing task, continuous paper out;

Cancel printing when the printer is printing and in a pause state.

Note: press the middle button when starting up to enter the corresponding special mode and operate according to

the on-screen prompts.

Special mode: self-check page printing, sensor calibration, hexadecimal debugging, restore the original Settings.

3. Under the option state:

the left button

Short press: select the previous option/setting parameter (decrement).

Long press: continuously select the previous option/continuously set parameters (descending).

the right buttons