Dynamatic 4000 Anleitungsblatt - Seite 8

Blättern Sie online oder laden Sie pdf Anleitungsblatt für Controller Dynamatic 4000 herunter. Dynamatic 4000 14 Seiten. With dancer position
Auch für Dynamatic 4000: Anleitungsblatt (15 seiten), Anleitungsblatt (13 seiten), Anleitungsblatt (13 seiten), Anleitungsblatt (14 seiten)

Seite drucken

1. Connection Diagram for Standard Enclosure 4000 Controller

maximum value. This limit can be used to prevent the motor breakover torque from being reached during

a condition such as drive output shaft "lock-up" or the period when a large system inertia is being

accelerated. The adjustment range is from 50 to 150% of rated motor torque.

Preliminary Adjustments

Perform the following preliminary adjustments (with no power applied to the controller)

1. Operator Controls (supplied by customer unless specified)

a. Set the Run Speed potentiometer R5 to 0% (Full CCW)

b. Note location of Start and Stop pushbuttons

Main PCB 15-530-5 or 15-530-6

The pots used are screwdriver adjust, single turn pots. Do not use a screwdriver with a blade width

exceeding 1/8 inch.

a. Set the Accel Rate potentiometer R18 to 100% (Full CW)

b. Set the Zero Adjust potentiometer R19 to 0% (Full CCW)

c. Set the Max Speed/Volts potentiometer R21 to 0% (Full CCW)

d. Set the Velocity Damping potentiometer R22 as follows (see trimpot illustration)

e. Set the Time Constant (TC) Adjust potentiometer R26 as follows (see trimpot illustration)

Mechanical Unit*

AC/ACM/ACS/PD/VT

Models EC/AS

Fractional Hp

14/121/140

181/182/184/186

18/21/132/160/180/210 50%

214/216/254/256

25/27/180/225/250/280 75%

280/320/360/440

320/360/440

*Typical product number stamped on mechanical unit

nameplate:

A1-100214-0053, Specific mechanical model is AC-214

B2-100210-0008, Specific mechanical model is AS-21

Set the Current Feedback potentiometer

R20 to 0% (Full CCW)

Velocity

Damping

75%

Figure: Trimpot Illustration

Mechanical Unit*

AC/ACM/ACS/PD/VT

Models EC/AS

Fractional Hp

FHP/181/182

184/186/214

14/18/112/132/140/180

216/254/256/280

21/160/210

320/360/440

25/27/180/225/250/280/

320/360/440

Adjust

15%

30%

100%