Hideaway Deluxe Series Wie man pflegt
Blättern Sie online oder laden Sie pdf Wie man pflegt für Inneneinrichtung Hideaway Deluxe Series herunter. Hideaway Deluxe Series 2 Seiten. Range floor mount
Auch für Hideaway Deluxe Series: Einbauanleitung (2 seiten), Einbauanleitung (2 seiten)
Seite druckenHow to care for and maintain
NOTE: Diagrams indicating the different bin components can be found in the downloadable installation
instructions for each bin model. This is located on our website in the INFO / DOWNLOADS section.
IMPORTANT INFORMATION
• Do not over fill your bin as contents could scratch your
friction-fitted lid (Deluxe & Soft Close ranges only).
• Refrain from pushing down on rubbish inside your bucket/s as
this creates extra pressure on the screw fixings inside the cabinet.
How to keep your Hideaway Bin clean
• It is recommended you use warm soapy water to clean your
Hideaway Bin.
• Avoid hard abrasive cleaners.
• When cleaning, try to avoid getting the runners wet, however,
if this happens ensure you dry the runners well and then regrease
with a small amount of petroleum jelly, such as Vaseline, or a clear
silicone grease.
How to care for, remove and replace
runners for cleaning
TO CARE FOR YOUR RUNNERS (all bin models):
• Over time you may need to lubricate your runners for continued
free movement. To do this, lube with a small amount of petroleum
jelly, such as Vaseline, or a clear silicone grease. For Deluxe and
Compact models, the runners can be separated, which makes it
easier to clean and lubricate. See instructions below for separating
runners.
• Your Hideaway Bin has ball bearing runners which gain a
memory over time. This occurs due to the bin usually being opened
partially during everyday use. This can make it difficult to open the
bin fully. To ensure your bucket/s will always come clear of your
bench top, every so often place a firm grip on either side of your
handle/door bracket and slowly, but firmly, pull the unit towards
you. Continue to pull the runners towards you until they reach
their maximum extension. Then close your unit fully again.
TO SEPARATE RUNNERS FOR CLEANING (all Deluxe models and
Compact KC240 &KC235 models):
• Remove the buckets from your unit. Fully extend the runners. To
do this, find the black levers located on the outer side of both the
left and right runner.
Runners engaged - push left lever
down and right lever up
Runner Outer
Black lever
Runner
on runners
Inner
your Hideaway
(Compact, Deluxe, Soft Close Ranges)
Runners disengaged - pull the runner
inner clear of the outer
Runner Outer
Runner Inner
Pull the inner runner out until
it separates from the unit
Bin
®
• Simultaneously, push the left lever down and the right lever
up and pull inner of the runners towards you until it separates
completely from the unit. Set runner inner with collar, handle/door
bracket attached aside in a safe location.
• Push the outer runners attached to the top mounting panel
back inside the unit.
TO SEPARATE RUNNERS FOR CLEANING
(all other Compact models):
• Remove the buckets from your unit. Fully extend the runners.
• Press the yellow runner release latches on both sides.
• Holding the mounting panel securely, pull the handle or door
bracket to separate the inner components from the mounting
panel.
Runner
Yellow Runner Release Latch
TO CLEAN AND REATTACH RUNNERS
(Deluxe and Compact models only):
• Ensure the outer runners attached to the top mounting panel
are pushed all the way inside the unit. With the outer runners,
ensure the inner slider is pulled all the way towards the front of
the unit.
• Wipe runners with a clean cloth, cotton bud or toothbrush.
Apply a small amount of petroleum jelly, such as Vaseline, or a
clear silicone grease to the runners.
• Line up the inner runners (with collar attached) to the outer
runners that are attached to the top mounting panel (which is
installed in your cupboard).
• Push the inner runners all the way in until the unit closes to
engage the runners. Pull unit open again. The runners should
move with ease indicating correct positioning.
Mounting Panel