Celestron CPC 925 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör Celestron CPC 925 herunter. Celestron CPC 925 14 Seiten. Nexstar hand control
Auch für Celestron CPC 925: Handbuch zum Kommunikationsprotokoll (8 seiten)
Seite drucken
Scroll through the menu
system to set the current
date, time and time zone.
2-Star Alignment
You are now ready to align the telescope with the stars in the sky. But to do this you needed to first
set the correct time, date and time zone in the telescope. But that is now done.
Before you start the alignment process you will need to familiarise yourself with some of the brighter
stars in the sky as the telescope will soon ask you which two stars you want to align it to. At the rear
of this document are four star charts, two for early April and two for early August. One chart for
CPC READY
UTILITIES
SCOPE SETUP
SCOPE SETUP
SETUP TIME-SITE
TIME hh:mm:ss
xx:xx:xx
SELECT ONE
STANDARD TIME
SELECT TIME ZONE
ZONE 10
DATE mm/dd/yy
xx:xx:xx
However, if the hand controller
display reads "Press ENTER to
Turn GPS off" you need to do
as instructed and press ENTER.
The GPS is now turned OFF.
Now press the UNDO button
to exit this menu area. Press
the UNDO button a couple of
times to get back to the CPC
READY screen
From the CPS READY screen,
press the MENU button. Use
the Up 6/Down 9 buttons to
scroll through the options until
SCOPE SETUP is displayed.
Press ENTER to enter this
menu area.
When "Setup Time-Site" is
displayed, press ENTER.
The telescope is now asking
you to key-in the current time
in 24 hour format –
hours:minutes:seconds,
perhaps 19:33:12. Press
ENTER when all digits inserted.
If daylight saving does not
apply, press ENTER to select
standard time.
Queensland is in international
time zone +10. Press ENTER of
"ZONE 10" is displayed, or use
the Up/Down keys to move to
10, then press ENTER.
Key in the current date in
American mm:dd:yy format.
Press ENTER.
6