- ページ 6

アクセサリー Celestron CPC 925のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Celestron CPC 925 14 ページ。 Nexstar hand control
Celestron CPC 925 にも：通信プロトコル・マニュアル (8 ページ)

ページを印刷する

Scroll through the menu

system to set the current

date, time and time zone.

2-Star Alignment

You are now ready to align the telescope with the stars in the sky. But to do this you needed to first

set the correct time, date and time zone in the telescope. But that is now done.

Before you start the alignment process you will need to familiarise yourself with some of the brighter

stars in the sky as the telescope will soon ask you which two stars you want to align it to. At the rear

of this document are four star charts, two for early April and two for early August. One chart for

CPC READY

UTILITIES

SCOPE SETUP

SETUP TIME-SITE

TIME hh:mm:ss

xx:xx:xx

SELECT ONE

STANDARD TIME

SELECT TIME ZONE

ZONE 10

DATE mm/dd/yy

xx:xx:xx

However, if the hand controller

display reads "Press ENTER to

Turn GPS off" you need to do

as instructed and press ENTER.

The GPS is now turned OFF.

Now press the UNDO button

to exit this menu area. Press

the UNDO button a couple of

times to get back to the CPC

READY screen

From the CPS READY screen,

press the MENU button. Use

the Up 6/Down 9 buttons to

scroll through the options until

SCOPE SETUP is displayed.

Press ENTER to enter this

menu area.

When "Setup Time-Site" is

displayed, press ENTER.

The telescope is now asking

you to key-in the current time

in 24 hour format –

hours:minutes:seconds,

perhaps 19:33:12. Press

ENTER when all digits inserted.

If daylight saving does not

apply, press ENTER to select

standard time.

Queensland is in international

time zone +10. Press ENTER of

"ZONE 10" is displayed, or use

the Up/Down keys to move to

10, then press ENTER.

Key in the current date in

American mm:dd:yy format.

Press ENTER.