Gala Tent PVC Montage- und Pflegeanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Montage- und Pflegeanleitung für Zelt Gala Tent PVC herunter. Gala Tent PVC 12 Seiten. Marquee 3m x 4m

1. Lay out the roof poles and joints

as seen on drawings. Ensure all parts

are in their correct positions and then

assemble roof frame, making sure

the poles are xed tight into the joints

as far as they can go, ignore holes in

the poles these are not locating holes.

1b. Attach the locating joint screws

(wing nuts), which secure the Joints to

the poles. ( roof pole = B pole )

2. Lay the roof cover over the frame

and attach using the elastic bungee

toggle straps provided.

3. Using the required number of

people, lift one side of the Gala Tent™

and insert the legs. Ensure that the

holes in the poles are placed towards

the bottom as the leg cover clips to

these.

4. If you intend to use the end wall

panels it is easier to attach these

now, before the Gala Tent™ is at full

height unless you have steps.

Structure Assembly