Gala Tent PVC 조립 및 관리 매뉴얼 - 페이지 5

{카테고리_이름} Gala Tent PVC에 대한 조립 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gala Tent PVC 12 페이지. Marquee 3m x 4m

1. Lay out the roof poles and joints

as seen on drawings. Ensure all parts

are in their correct positions and then

assemble roof frame, making sure

the poles are xed tight into the joints

as far as they can go, ignore holes in

the poles these are not locating holes.

1b. Attach the locating joint screws

(wing nuts), which secure the Joints to

the poles. ( roof pole = B pole )

2. Lay the roof cover over the frame

and attach using the elastic bungee

toggle straps provided.

3. Using the required number of

people, lift one side of the Gala Tent™

and insert the legs. Ensure that the

holes in the poles are placed towards

the bottom as the leg cover clips to

these.

4. If you intend to use the end wall

panels it is easier to attach these

now, before the Gala Tent™ is at full

height unless you have steps.

Structure Assembly