Hifonics Zeus ZRX200A Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Subwoofer Hifonics Zeus ZRX200A herunter. Hifonics Zeus ZRX200A 13 Seiten.

INTERCONNECTION

PROTECTION CIRCUIT

If the POWER LED ( 4 ) lits up, the device is in normal operation. If the PROTECT LED ( 3 ) lits up, the device is overheated. If this occurs, the

internal built-in protection circuit shuts down the device automatically. The device should work again properly after cooling down.

AUDIO SIGNAL CABLES

Connect the audio signal cables from the RCA outputs of the head unit to the RCA inputs on the device ( 1 ).

The HI LEVEL INPUT ( 2 ) is suitable to connect the device input with speaker wires, if your head unit is not equipped with pre-amplifier RCA

outputs. Extend therefor every regarding speaker cable from your head unit with appropriate speaker cables from your car audio retailer

to the mounting location of the amplifier. Then connect the each matching loudspeaker cable with the cables of the included HIGH LEVEL

input jack.

NOTE: Never use the HI LEVEL INPUT ( 2 ) and the LOW LEVEL INPUT ( 1 ) at the same time. This may damage the device seriously.

PHASE

POWER

0°

180°

50Hz 150Hz

PROTECT

OFF

AUTO TURN-ON

LPF

BOOST

LEVEL

0dB +18dB

MIN MAX

ZRX200A

ACTIVE SUBWOOFER SYSTEM

LINE INPUTS

HI LEVEL INPUT

L–

R–

BASS LEVEL

CONTROLLER

LOW LEVEL INPUT

POWER INPUTS

FUSE

25A

ENG

GND

REM

+12V