909 909210TS Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Säge 909 909210TS herunter. 909 909210TS 18 Seiten. 1200w 210mm 8" table saw
•
Do not stop the saw blade by using lateral pressure on
the side of the saw blade.
•
Do not lock the moveable guard in the open position and
always ensure that it is working properly, freely dropping
to fully cover the teeth of the blade.
•
Always remove the plug from the mains socket before
making any adjustments or maintenance, including
changing the blade.
Additional safety rules for saws
•
Always pull the plug out of the power socket before
adjusting or servicing the machine.
•
Give these safety regulations to all persons who work on
the machine.
•
Do not use this saw to cut firewood.
CAUTION!
•
Hands and fingers may be injured on the
rotating saw blade.
•
Before you use the machine for the first time, check that
the voltage marked on the rating plate is the same as
your mains voltage.
•
If you need to use an extension cable, make sure its
conductor cross-section is large enough for the saw's
power consumption. Minimum cross-section: 1.0mm
•
Do not use or leave the saw in the rain and never use it
in damp, humid, or wet conditions.
•
Provide good lighting.
•
Never saw near combustible liquids or gases.
•
Wear suitable work clothes! Loose garments or jewellery
may become caught up in the rotating saw blade.
•
Operators have to be at least 18 years of age. Trainees
of at least 16 years of age are allowed to use the
machine under supervision.
•
Keep children and infirm people away from the machine
when it is connected to the power supply.
•
Check the power cord. Never use a faulty or damaged
power cord.
•
If the cordset is damaged take the saw to an authorised
service centre for repair or replacement
•
Never attempt any repairs yourself, always take it to an
authorised service centre for repair or parts replacement.
•
Keep the saw table and your workplace clean of wood
scrap and any unnecessary objects.
•
Keep the area free of tripping hazards.
•
Persons working with the machine should not be
distracted.
•
Note the direction of rotation of the motor and saw blade.
•
After you have switched off the motor, never slow down
the saw blade by applying pressure to its side.
•
Fit only blades which are well sharpened and have no
cracks or deformations.
•
The machine is to be operated only with a saw blade
from a reputable supplier.
•
Faulty saw blades have to be replaced immediately.
•
Never use saw blades, which do not comply with the data
specified in this manual.
•
Make sure that the arrow on the saw blade complies with
the arrow marked on the machine.
.
2
•
Never dismantle the machine's safety devices or put
them out of operation.
•
Damaged or faulty safety devices have to be replaced
immediately.
•
Never cut a work piece, which is too small to hold
securely.
•
If you are interrupted when operating the saw, complete
the process and switch off before looking up.
•
Periodically check that all nuts, bolts and other fixings are
properly tightened.
•
Do not store materials or equipment above a machine in
such a way that they could fall into it.
•
Always ensure that your work is on the table. Never use
the tool to cut pieces that are not on the table.
6