909 909210TS Instruction Manual - Page 6
Browse online or download pdf Instruction Manual for Saw 909 909210TS. 909 909210TS 18 pages. 1200w 210mm 8" table saw
Print Page•
Do not stop the saw blade by using lateral pressure on
the side of the saw blade.
•
Do not lock the moveable guard in the open position and
always ensure that it is working properly, freely dropping
to fully cover the teeth of the blade.
•
Always remove the plug from the mains socket before
making any adjustments or maintenance, including
changing the blade.
Additional safety rules for saws
•
Always pull the plug out of the power socket before
adjusting or servicing the machine.
•
Give these safety regulations to all persons who work on
the machine.
•
Do not use this saw to cut firewood.
CAUTION!
•
Hands and fingers may be injured on the
rotating saw blade.
•
Before you use the machine for the first time, check that
the voltage marked on the rating plate is the same as
your mains voltage.
•
If you need to use an extension cable, make sure its
conductor cross-section is large enough for the saw's
power consumption. Minimum cross-section: 1.0mm
•
Do not use or leave the saw in the rain and never use it
in damp, humid, or wet conditions.
•
Provide good lighting.
•
Never saw near combustible liquids or gases.
•
Wear suitable work clothes! Loose garments or jewellery
may become caught up in the rotating saw blade.
•
Operators have to be at least 18 years of age. Trainees
of at least 16 years of age are allowed to use the
machine under supervision.
•
Keep children and infirm people away from the machine
when it is connected to the power supply.
•
Check the power cord. Never use a faulty or damaged
power cord.
•
If the cordset is damaged take the saw to an authorised
service centre for repair or replacement
•
Never attempt any repairs yourself, always take it to an
authorised service centre for repair or parts replacement.
•
Keep the saw table and your workplace clean of wood
scrap and any unnecessary objects.
•
Keep the area free of tripping hazards.
•
Persons working with the machine should not be
distracted.
•
Note the direction of rotation of the motor and saw blade.
•
After you have switched off the motor, never slow down
the saw blade by applying pressure to its side.
•
Fit only blades which are well sharpened and have no
cracks or deformations.
•
The machine is to be operated only with a saw blade
from a reputable supplier.
•
Faulty saw blades have to be replaced immediately.
•
Never use saw blades, which do not comply with the data
specified in this manual.
•
Make sure that the arrow on the saw blade complies with
the arrow marked on the machine.
.
2
•
Never dismantle the machine's safety devices or put
them out of operation.
•
Damaged or faulty safety devices have to be replaced
immediately.
•
Never cut a work piece, which is too small to hold
securely.
•
If you are interrupted when operating the saw, complete
the process and switch off before looking up.
•
Periodically check that all nuts, bolts and other fixings are
properly tightened.
•
Do not store materials or equipment above a machine in
such a way that they could fall into it.
•
Always ensure that your work is on the table. Never use
the tool to cut pieces that are not on the table.
6