dbx DriveRack 4820 Spezifikationen
Blättern Sie online oder laden Sie pdf Spezifikationen für Stereo-Entzerrer dbx DriveRack 4820 herunter. dbx DriveRack 4820 2 Seiten. Complete equalization and loudspeaker management system
Seite drucken
System Architecture
Hardware Architecture
Employing industry standard networking
technologies, HiQnet™ hardware is ready to be integrated into any system. By using Ethernet
as its main interface, HiQnet™ assures that products will operate within existing and new
infrastructures and provides all the remote access, connectivity, and control required.
CONTROL
Software Architecture
DATA
than just a messaging protocol, HiQnet™ is a software
architecture for real-time control and monitoring com-
MESSAGING SERVICES
bined with streamed audio. The HiQnet™ architecture
is truly the first to allow the system not to be tied to an
underlying physical medium. Whether a simple RS232
STREAMING AUDIO
AUDIO CONTROL
ASYNCHRONOUS CONTROL
control command or fully streamed CobraNet audio and
HiQnet™ control over Ethernet, our architecture is flexible
enough to handle any situation.
AUDIO SERVICES
PACKET SERVICES
PHYSICAL MEDIUM
System Applications
The range of
HiQnet™-compatible devices offers previously unattain-
able benefits in diverse real-world systems:
Live sound
Commercial installation
Engineered installation
Broadcast
Portable PA
HiQnet
compatible devices
™
AKG
®
WMS 4000 wireless microphone system
BSS
®
Soundweb
distribution system
Crown
I-Tech
®
Crown
amplifier PIP modules – PIP Lite,
®
USP3, USP3/CN
dbx
®
DriveRack
loudspeaker management processors
JBL
®
VerTec
®
technology intelligent networked amplified
loudspeakers
Studer
Vista 8 high-end theatre / install
®
digital console
DriveRack
DriveRack 4800 front panel
DriveRack 4820 front panel
Far more
DriveRack 4800 and 4820 rear panel
INPUTS AND OUTPUTS
Analog Inputs:
(4)
Connectors:
Female XLR
Type:
Electronically balanced, RF filtered
Impedance:
>50k ohms
Maximum
Software selectable for: +28, +26, +24,
Input Level
+22, +20, +18, +16, +14 dBu
CMRR:
>40 dB typical, >55 dB at 1 kHz
Digital Inputs:
(4) AES/EBU Channels
Connectors:
Female XLR
Type:
Transformer Isolated, RF filtered
Impedance:
110 ohms
RTA Input:
(1) Analog
Connectors:
Female XLR
Gain range:
20 dB to 50 dB in 10 dB increments
Analog Outputs:
(8)
Connectors:
Male XLR
™
London networked audio
Type:
Electronically balanced, RF filtered
Impedance:
30 ohms
Max Output Level: Software selectable for: +24, +22, +20,
tour sound amplifier range
™
+12, +8, +4 dBu
Digital Outputs:
(8) AES/EBU Channels
Connectors:
Male XLR
®
4800 / 4820 networked
Type:
Transformer Isolated, RF filtered
Impedance:
110 ohms
DP Series with DrivePack
™
©2005 dbx Professional, All Rights Reserved. All specifications are subject to change. dbx and
HiQNet are trademarks of Harman International. All other trademarks are the properties of
their respective holders.
4800 & 4820 Specifications
®
A/D PERFORMANCE
Processing:
Blocks per input
Type:
dbx Type IV
™
Conversion System
Type:
Noise Gate, Compressor, Auto Gain Control,
De-Esser, Sub-Harmonic Synth, Notch filters
Dynamic Range:
113 dB unweighted, 116 dB A-weighted
and Advanced Feedback Suppression
Type IV™:
126 dB with transient material,
Input Delay:
Up to 680 mSec available
dynamic range
A-weighted, 22 kHz BW
123 dB with transient material,
Routing/Mixing:
4-input mixer available at each input and
unweighted, 22 kHz BW
output allowing any input to be sent or mixed
118 dB typical with program material,
to any output
A-weighted, 22 kHz BW
Output Insert
(2) selectable Insert Processing blocks per
Processing:
output
Sample Rate:
96 kHz or 48 kHz
Type:
Noise Gate, AutoWarmth
®
, Compressor, Auto
A/D Wordlength: 24 bits
Gain Control, Peak Limiter, Sub-Harmonic Synth
D/A PERFORMANCE
X-Over Filter
1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2,
Configurations
2x3, 2x4, 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6,
Dynamic Range:
112 dB unweighted, 115 dB A-weighted
3x7, 4x4, 4x8
Sample Rate:
96 kHz or 48 kHz
Types:
Bessel 6, 12, 18, 24, 36 and 48 dB/Octave
D/A Wordlength: 24 bits
Butterworth 6, 12, 18, 24, 36 & 48 dB/Octave
Linkwitz-Riley 12, 24, 36, and 48 dB/Octave
SYSTEM PERFORMANCE
Polarity:
Positive and Negative
Dynamic Range:
110 dB unweighted, 113 dB A-weighted
Internal Processing: 32 bit floating point
Phase Control:
0˚ to -180˚ in 5˚ increments
Output EQ Type: (1) 6-band Parametric on each output
THD + Noise:
0.004% typical at +4 dBu, 1 kHz,
0 dB input gain
Output Delay:
1365 mSec shared between the outputs
Frequency
20 Hz- 20 kHz, ±0.25 dB, <10
MISCELLANEOUS:
Response:
Hz- 50 kHz +0/-3dB @ 96kHz
I/O Transformers: Optional Jensen JT-11 & JT-123-dbx
Interchannel Crosstalk: <-85 dB at 1 kHz, 0 dB input gain
CobraNet
®
I/O:
Optional
PROCESSING
Control:
Ethernet, RS-232, Optional dbx ZC Wall Panels
Pre EQ Type:
(1) 31-band Graphic EQ on each input;
Power:
100V to 240V 50/60Hz, 35 Watts
(1) graphic EQ switchable between 31-band
Dimensions:
3.5" x 19" x 12.15"
and 9-band Parametric on each input
Weight:
11 lbs. (14 lbs. w/audio transformers)
Range:
±15 dB
Shipping Weight: 12.5 lbs. (15.5 lbs. w/audio transformers)
Input Insert
(2) selectable Insert Processing
dbx Professional Products • 8760 South Sandy Parkway • Sandy UT 84070 • Phone 801.568.7660
Fax 801.568.7662 • Int'l Fax 801.568.7583 • email: [email protected] • www.dbxpro.com
18-0362
4800/4820 DriveRack
Complete Equalization and Loudspeaker Management System
Family
®
www.dbxpro.com