dbx DriveRack 4820 Specyfikacje

Przeglądaj online lub pobierz pdf Specyfikacje dla Korektor stereo dbx DriveRack 4820. dbx DriveRack 4820 2 stron. Complete equalization and loudspeaker management system

Drukuj stronę

System Architecture

Hardware Architecture

Employing industry standard networking

technologies, HiQnet™ hardware is ready to be integrated into any system. By using Ethernet

as its main interface, HiQnet™ assures that products will operate within existing and new

infrastructures and provides all the remote access, connectivity, and control required.

CONTROL

Software Architecture

DATA

than just a messaging protocol, HiQnet™ is a software

architecture for real-time control and monitoring com-

MESSAGING SERVICES

bined with streamed audio. The HiQnet™ architecture

is truly the first to allow the system not to be tied to an

underlying physical medium. Whether a simple RS232

STREAMING AUDIO

AUDIO CONTROL

ASYNCHRONOUS CONTROL

control command or fully streamed CobraNet audio and

HiQnet™ control over Ethernet, our architecture is flexible

enough to handle any situation.

AUDIO SERVICES

PACKET SERVICES

PHYSICAL MEDIUM

System Applications

The range of

HiQnet™-compatible devices offers previously unattain-

able benefits in diverse real-world systems:

Live sound

Commercial installation

Engineered installation

Broadcast

Portable PA

HiQnet

compatible devices

™

AKG

WMS 4000 wireless microphone system

BSS

Soundweb

distribution system

Crown

I-Tech

Crown

amplifier PIP modules – PIP Lite,

USP3, USP3/CN

dbx

DriveRack

loudspeaker management processors

JBL

VerTec

technology intelligent networked amplified

loudspeakers

Studer

Vista 8 high-end theatre / install

digital console

DriveRack

DriveRack 4800 front panel

DriveRack 4820 front panel

Far more

DriveRack 4800 and 4820 rear panel

INPUTS AND OUTPUTS

Analog Inputs:

(4)

Connectors:

Female XLR

Type:

Electronically balanced, RF filtered

Impedance:

>50k ohms

Maximum

Software selectable for: +28, +26, +24,

Input Level

+22, +20, +18, +16, +14 dBu

CMRR:

>40 dB typical, >55 dB at 1 kHz

Digital Inputs:

(4) AES/EBU Channels

Connectors:

Female XLR

Type:

Transformer Isolated, RF filtered

Impedance:

110 ohms

RTA Input:

(1) Analog

Connectors:

Female XLR

Gain range:

20 dB to 50 dB in 10 dB increments

Analog Outputs:

(8)

Connectors:

Male XLR

™

London networked audio

Type:

Electronically balanced, RF filtered

Impedance:

30 ohms

Max Output Level: Software selectable for: +24, +22, +20,

tour sound amplifier range

™

+12, +8, +4 dBu

Digital Outputs:

(8) AES/EBU Channels

Connectors:

Male XLR

4800 / 4820 networked

Type:

Transformer Isolated, RF filtered

Impedance:

110 ohms

DP Series with DrivePack

™

HiQNet are trademarks of Harman International. All other trademarks are the properties of

their respective holders.

4800 & 4820 Specifications

A/D PERFORMANCE

Processing:

Blocks per input

Type:

dbx Type IV

™

Conversion System

Type:

Noise Gate, Compressor, Auto Gain Control,

De-Esser, Sub-Harmonic Synth, Notch filters

Dynamic Range:

113 dB unweighted, 116 dB A-weighted

and Advanced Feedback Suppression

Type IV™:

126 dB with transient material,

Input Delay:

Up to 680 mSec available

dynamic range

A-weighted, 22 kHz BW

123 dB with transient material,

Routing/Mixing:

4-input mixer available at each input and

unweighted, 22 kHz BW

output allowing any input to be sent or mixed

118 dB typical with program material,

to any output

A-weighted, 22 kHz BW

Output Insert

(2) selectable Insert Processing blocks per

Processing:

output

Sample Rate:

96 kHz or 48 kHz

Type:

Noise Gate, AutoWarmth

, Compressor, Auto

A/D Wordlength: 24 bits

Gain Control, Peak Limiter, Sub-Harmonic Synth

D/A PERFORMANCE

X-Over Filter

1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2,

Configurations

2x3, 2x4, 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6,

Dynamic Range:

112 dB unweighted, 115 dB A-weighted

3x7, 4x4, 4x8

Sample Rate:

96 kHz or 48 kHz

Types:

Bessel 6, 12, 18, 24, 36 and 48 dB/Octave

D/A Wordlength: 24 bits

Butterworth 6, 12, 18, 24, 36 & 48 dB/Octave

Linkwitz-Riley 12, 24, 36, and 48 dB/Octave

SYSTEM PERFORMANCE

Polarity:

Positive and Negative

Dynamic Range:

110 dB unweighted, 113 dB A-weighted

Internal Processing: 32 bit floating point

Phase Control:

0˚ to -180˚ in 5˚ increments

Output EQ Type: (1) 6-band Parametric on each output

THD + Noise:

0.004% typical at +4 dBu, 1 kHz,

0 dB input gain

Output Delay:

1365 mSec shared between the outputs

Frequency

20 Hz- 20 kHz, ±0.25 dB, <10

MISCELLANEOUS:

Response:

Hz- 50 kHz +0/-3dB @ 96kHz

I/O Transformers: Optional Jensen JT-11 & JT-123-dbx

Interchannel Crosstalk: <-85 dB at 1 kHz, 0 dB input gain

CobraNet

I/O:

Optional

PROCESSING

Control:

Ethernet, RS-232, Optional dbx ZC Wall Panels

Pre EQ Type:

(1) 31-band Graphic EQ on each input;

Power:

100V to 240V 50/60Hz, 35 Watts

(1) graphic EQ switchable between 31-band

Dimensions:

3.5" x 19" x 12.15"

and 9-band Parametric on each input

Weight:

11 lbs. (14 lbs. w/audio transformers)

Range:

±15 dB

Shipping Weight: 12.5 lbs. (15.5 lbs. w/audio transformers)

Input Insert

(2) selectable Insert Processing

dbx Professional Products • 8760 South Sandy Parkway • Sandy UT 84070 • Phone 801.568.7660

Fax 801.568.7662 • Int'l Fax 801.568.7583 • email: [email protected] • www.dbxpro.com

18-0362

4800/4820 DriveRack

Complete Equalization and Loudspeaker Management System

Family