dbx SC 32 Installationshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Installationshandbuch für Computer Hardware dbx SC 32 herunter. dbx SC 32 20 Seiten. Digital matrix processors

SC 32 / SC 64

Section 3

Wiring

ZC-1 - The ZC-1 is a programmable zone controller that allows input or output volume level

control from a wall panel.

ZC-2 - The ZC-2 is a programmable zone controller that allows input or output volume level and

mute control from a wall panel.

ZC-3 - The ZC-3 allows wall panel routing and Actions selection for the SC devices.

ZC-4 - The ZC-4 provides contact closure routing and Actions selection for room combining or

fire safety applications.

ZC-Fire - The ZC-Fire is the interface to generic fire alarm relays. When fire alarm activates, the

general purpose relay can typically be programmed to close if normally open or vices-versa. The

ZC-fire interface unit monitors the state of the relay (n.o. or n.c.) and upon the state of change,

notifies the SC 32/64, which then mutes its outputs.

ZC-6 - The ZC-6 is a push-button up and down input or output volume controller.

ZC-7 - The ZC-7 allows Actions selection for the SC devices.

ZC-8 - The ZC-8 is used for a combination of input or output volume up/down, and four position

source/program select.

ZC-9 - The ZC-9 allows wall panel routing and Actions selection for the SC devices.

ZC-BOB - The ZC-BOB allows parallel or home run cabling of the Zone Controllers.