dbx SC 32 Installatiehandleiding - Pagina 15
Blader online of download pdf Installatiehandleiding voor {categorie_naam} dbx SC 32. dbx SC 32 20 pagina's. Digital matrix processors
SC 32 / SC 64
Section 3
Wiring
ZC-1 - The ZC-1 is a programmable zone controller that allows input or output volume level
control from a wall panel.
ZC-2 - The ZC-2 is a programmable zone controller that allows input or output volume level and
mute control from a wall panel.
ZC-3 - The ZC-3 allows wall panel routing and Actions selection for the SC devices.
ZC-4 - The ZC-4 provides contact closure routing and Actions selection for room combining or
fire safety applications.
ZC-Fire - The ZC-Fire is the interface to generic fire alarm relays. When fire alarm activates, the
general purpose relay can typically be programmed to close if normally open or vices-versa. The
ZC-fire interface unit monitors the state of the relay (n.o. or n.c.) and upon the state of change,
notifies the SC 32/64, which then mutes its outputs.
ZC-6 - The ZC-6 is a push-button up and down input or output volume controller.
ZC-7 - The ZC-7 allows Actions selection for the SC devices.
ZC-8 - The ZC-8 is used for a combination of input or output volume up/down, and four position
source/program select.
ZC-9 - The ZC-9 allows wall panel routing and Actions selection for the SC devices.
ZC-BOB - The ZC-BOB allows parallel or home run cabling of the Zone Controllers.
11
®