Autonics PSQ-C01 Series Datenblatt - Seite 11

Blättern Sie online oder laden Sie pdf Datenblatt für Messgeräte Autonics PSQ-C01 Series herunter. Autonics PSQ-C01 Series 14 Seiten. Dual lcd display digital pressure sensor

Seite drucken

Compact, Dual LCD Display Digital Pressure Sensor

Functions

Parameter copy

※

This function is for copying parameter settings of Master

to Slave 1:1. Master and Slave should be the same

specification model.

(brown) +V

[Master]

(blue) 0V

(black) OUT1 (black) OUT1

(white) OUT2

At Master unit,

Set parameter copy [COPY] of

PA 2 group as

At Master unit,

SV display part:

Turn OFF the Master unit

Connect Master/Slave units

Turn ON the Master/Slave units

with pressing the

[Master unit]

PV display: arbitrary value

SV display:

[Slave unit]

PV display: arbitrary value

SV display:

Turn OFF the Master/Salve units

and disconnect

Master/Slave units

※ 1: ON: Copies SVs.,

ON-L: Copies SVs and locks front keys of Slave unit.

※ 2: When connecting

Master unit and Slave unit incorrectly,

the PV display of Master unit displays

Turn OFF the Master unit power and turn ON it.

It displays REDY at SV display part.

※ 3: The PV display part of

Master displays as orange

color. The PV display part of Slave displays as green

color. When completing copy, the PV display part of

Master and Slave displays the same arbitrary value.

※ 4: Connect other Slave units to copy parameters.

Analog output scale adjustment

※

only for NPN or PNP open collector output+

analog output or external input type

Set output voltage, output current to the current display

value at 1-5VDC voltage output [A-V], DC4-20mA [A-C]

current output.

ᆞSet pressure value for 1VDC output [A-1V] and

pressure value for 5VDC output [A-5V].

[A-1V] setting range: 0% F.S.≤ [A-1V] ≤ 100% F.S.

[A-5V] setting range: 0% F.S.≤ [A-5V] ≤ [A-1V] -10% F.S. or

[A-1V]

ᆞSet pressure value for 4mA output [A-04] and

pressure value for 20mA output [A-20].

[A-04] setting range: 0% F.S.≤ [A-04] ≤100% F.S.

[A-20] setting range: 0% F.S.≤ [A-20]≤ [A-04]-10% F.S. or

[A-04]

[Slave]

(white) OUT2

※ 1

ON-L

REDY

※ 4

※ 2

key

※ 3

COPY

ERR4.

10% F.S.≤ [A-5V] ≤100% F.S.

10% F.S.≤ [A-20]≤100% F.S.

Auto Shift/Remote Zero/Hold input

※

Only for NPN or PNP open collector output+

analog output or external input type

Auto Shift [SHFT], Remote Zero [ZERO]

When reference pressure of the pressure sensor changes,

apply auto shift or remote zero digital input. It corrects

present pressure to reference pressure and by moving

detection level as much as fluctuation level. In case of

remote zero, it is the same function as auto shift but

remote zero makes the measured pressure as 0 forcibly.

When changing analog output and external input setting,

auto shift correction value [ShIN], remote zero correction

value [ZeIN] are also reset as 0.

ᆞSetting correction value

: Press the

key to set SV manually or

to orange cable over 1ms.

When selecting analog output/external input

parameter 1 group as

[SHFT] or [ZERO], press the

key to select control output

correction value.

ᆞDeleting correction value

Press the

keys for over 1 sec to delete

shift correction.

Hold [HOLD]

The function to hold PV and control output while signal is input.

Output mode change

OUT1 operation mode

There are 4 kinds of control output mode in order to realize

the various pressure detection.

• Hysteresis mode [HYsM]

: When needed to change hysteresis for detecting pressure.

• Window comparison output mode [WIN]

: When needed to detect pressure in certain area.

• Automatic sensitivity setting mode [AUTO]

: When needed to set detection sensitivity automatically at

proper position.

• Forced output control mode [fOUT]

: When needed to display pressure with remaining

comparison output OFF regardless of setting value.

OUT2 operation mode

Select control output mode between two types or OFF.

In case of OUT1 operation mode, select automatic sensi-

tivity setting mode [AUTO] or forced output control mode

[fOUT]. OUT2 operation mode setting is inactive.

• Hysteresis mode [HYsM]

: When needed to change hysteresis for detecting pressure.

• Window comparison output mode [WIN]

: When needed to detect pressure in certain area.

• OFF [OFF]

apply

0VDC

[I/O] of

[ShOT], [ZeOT] to be with

set

auto

G-19

SENSORS

CONTROLLERS

MOTION DEVICES

SOFTWARE

(A)

Photoelectric

Sensors

(B)

Fiber Optic

Sensors

(C)

LiDAR

(D)

Door/Area

Sensors

(E)

Vision

Sensors

(F)

Proximity

Sensors

(G)

Pressure

Sensors

(H)

Rotary

Encoders

(I)

Connectors/

Connector Cables/

Sensor Distribution

Boxes/ Sockets