Autonics PSQ-C01 Series Datenblatt - Seite 8

Blättern Sie online oder laden Sie pdf Datenblatt für Messgeräte Autonics PSQ-C01 Series herunter. Autonics PSQ-C01 Series 14 Seiten. Dual lcd display digital pressure sensor

Seite drucken
PSQ Series

Preset Setting

Setting guide

To enter the preset setting mode,
Press the
,
key to change preset value, the
If there is no additional key or the
forced output control mode)
●NPN or PNP open collector output(OUT1/2)
1. Select OUT1/2 operation mode
group.
( OUT1/2 operation
mode: easy, hysteresis, window comparison, auto
sensitivity setting,
forced output
2. Enter the preset setting mode from RUN mode.
( set items are displayed in the order of OUT1 - OUT2)
3. Set the value for each item.
Setting example
OUT1:
Hysteresis mode
OUT2:
Window comparison mode
Run mode
for over
M
,
2 sec
Pressure
detection
ST1
level 1
M
Hysteresis
HYS1
level 1
M
Pressure
detection level 2
LO2
low-limit value
M
Pressure
detection level 2
HI2
high-limit value
●Note
Setting items and setting value are displayed at the setting value (SV) display part alternatively.
Operation mode
(easy, hysteresis, window comparison, auto sensitivity setting)
display parameter name with identification
When changing pressure unit or analog output/extenal
When changing operation mode, the preset value is reset for the changed mode.
●Preset setting by output operation mode
Output
operation
Preset
mode
EASY Easy
HYsM Hysteresis
HYS Hysteresis level
Window com-
WIN
parison
ST1
ST2
Auto sensitivity
AUTO
setting
SET
Forced output
-
fOUT
control
A-1V 1V output SV
Analog voltage
A-V
output
A-5V 5V output SV
A-04 4mA output SV
Analog current
A-C
output
A-20 20mA output SV
G-16
press the
,
key in RUN mode.
key to move to the next mode.
M
key
input for over 2 sec during setting, the value is automatically set and it returns to RUN mode. (except
M
[OUT1/2] to use in parameter 1
control)
05)0
OUT1:
Hysteresis
mode
-5)0
-5)0
OUT2:
Window
comparison
mode
05)0
number.([ST]:
[ST1]/[
input, the
Setting range
Pressure detection
Min. display pressure＜[P] ≤ Max. display pressure
P
level
Pressure detection
Min. display pressure＜[ST] ≤ Max. display pressure
ST
level
Min. display pressure ≤ [HYS]＜[ST]
Pressure detection
Min. display pressure ≤ [LO] ≤ Max. display pressure
LO
level low-limit
- (3 × min. display unit)
Pressure detection
[LO] + (3 × min. display unit) ≤ [HI] ≤ Max. display pressure
HI
level high-limit
Pressure detection
Min. display pressure ≤ [ST1] ≤ Max. display pressure
level 1
- 1% of rated pressure
Pressure detection
[ST1] + 1% of rated pressure ≤ [ST2] ≤ Max. display pressure
level 2
SET=
Pressure detection
Pressure detection level [SET] can be selectable by pressing
level
the
-
-
0% F.S. ≤ [A-1V] ≤ 100% F.S.
[A-1V] + 10% F.S. ≤ [A-5V] ≤ 100% F.S. or
0% F.S.≤ [A-5V] ≤ [A-1V] - 10% F.S.
0% F.S. ≤ [A-04] ≤ 100% F.S.
[A-04] + 10% F.S. ≤ [A-20] ≤ 100% F.S. or
0% F.S. ≤ [A-20] ≤ [A-04] - 10% F.S.
●Analog output/External input
1. Select analog output/extenal input mode
parameter 1 group.
(
Analog output/extenal
output, auto Shift, remote zero, hold)
2. Enter the preset setting mode from RUN mode.
( analog output/external input items are displayed after OUT1 -
OUT2)
3. Set the value for each item.
Setting example
Analog current output scale
OUT1, OUT2 Preset setting
4mA
output
A-04
SV
20mA
output
A-20
SV
that can be set separately per each output (OUT1/OUT2)
ST2])
preset value is initialized corresponding to changed item.
(ST1+ST2)
, [ST1] ≤ [SET] ≤ [ST2]
2
,
key.
[I/O] to use in
input: analog voltage output, analog current
M
`0)0
M
10)0
M
Factory default
-100.0 to
-100 to
100.0kPa
1,000kPa
05)0
0500
05)0
0500
-5)0
0000
-5)0
0000
05)0
0500
-5)0
0000
05)0
0500
00)0
0250
-
-
`0)0
0000
10)0
1000
`0)0
0000
10)0
1000