Autonics FS4E-1P2 Produkthandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Produkthandbuch für Zeitschaltuhr Autonics FS4E-1P2 herunter. Autonics FS4E-1P2 4 Seiten. 8-pin plug digital timers with thumb wheel switch
Seite drucken
Output operation mode
• Output type
One-shot output
Retained (hold) output
• Set One-shot output time via [TIME] volume switch on the front side.
Setting range: 0.05 to 5 sec
Output operation Description
Mode
Count up
RESET
Setting
0
F
Output
After time-up, the display value increases or decreases until reset signal input is
applied and retained (hold) output is maintained.
RESET
Setting
0
N
Output
After time-up, the display value and retained (hold) output are maintained until
reset signal input is applied.
RESET
Setting
0
C
Output
When time-up, the display value is reset and it operates simultaneously.
RESET
Setting
0
R
Output
After time-up, the display value is reset after one-shot output time and it operates
simultaneously.
RESET
Setting
0
K
Output
After time-up, the display value increases or decreases until reset signal input is
applied.
RESET
Setting
0
P
Output
After time-up, the display value is maintained while output is ON. The value is
internally reset and it operates simultaneously.
RESET
Setting
0
Q
Output
After time-up, the display value increases or decreases during one-shot output time.
RESET
Setting
0
S
Output
Output turns OFF→ON→OFF operates repeatedly (flicker).
■ Time operation (for indicator model)
Count up mode
RESET
INHIBIT
+Max.
time range
0
• (-) display is only for F, K, Q, S output operation mode and it cannot be set.
Count down
RESET
Setting
0
Output
RESET
Setting
0
Output
RESET
Setting
0
Output
RESET
Setting
0
Output
RESET
Setting
0
Output
RESET
Setting
0
Output
RESET
Setting
0
Output
RESET
Setting
0
Output
Count down mode
RESET
INHIBIT
+Max.
time range
0
-Max.
time range
18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002
www.autonics.com | +82-51-519-3232 | [email protected]
-